| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Bilstein reference Question. F4-BE5-6458-H6 http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=54840 |
Page 1 of 1 |
| Author: | RRiveraKK [ Tue Aug 10, 2010 5:49 pm ] |
| Post subject: | Bilstein reference Question. F4-BE5-6458-H6 |
So I just purchased the RK lift (thanks Clacker). So now I need the rear shocks less than 4". I've been giving it some thought and I'm about to order the Bilstein 5100. As I have been researching I've come across three diferent #'s (1) F4-BE5-6458-H5 (2) F4-BE5-6458-H6 and (3) F4-BE5-6458-H7. I think the H7 is what fits on KJ's according to Jeepingbyal.com page. In the same page Jeepingbyal.com says the KK are H5, and in our Shock Cross Ref it provide us w the H6. so that has confused me a bit, if anyone can let me know what the diference are between them, if any. Oh and on a side note anyone have opinions on any other shock that has worked for them. Any info will be greatly appreciated. Thanks |
|
| Author: | Jeepin_it_real [ Tue Aug 10, 2010 8:23 pm ] |
| Post subject: | Re: Bilstein reference Question. F4-BE5-6458-H6 |
the 2.5 inch shock listed by JBA is what you need. the front should ramin the same length as stock i believe but if you switch to bilsein the HD shock is listed at JBA also |
|
| Author: | das4x4 [ Tue Aug 10, 2010 11:17 pm ] |
| Post subject: | Re: Bilstein reference Question. F4-BE5-6458-H6 |
RRiveraKK, I had the same question when my Bilstiens came in. When ordered, it was the H5 model advertised at JBA, but I recieved the H7 model. (same 5100 series. same F4-BE5-6458#) I called Marlin at JBA and he told me that H7 designation represents the improvement or upgrade over the previous version of the H5. I was relieved as the H7's are a black and silver vs the blue/yellow color combo of the H5. I really liked that color combo. Not sure what the specific improvement that was made. Marlin didn't say. He did say some KK owners were adding a washer to the upper mounting point to make the fit a little better. Others are just tightening the mounting bolts so as to draw the mounts closer. Interesting timing of your post as I'm putting mine on Thursday. I'll post how the fit is. |
|
| Author: | RRiveraKK [ Thu Aug 12, 2010 1:12 am ] |
| Post subject: | Re: Bilstein reference Question. F4-BE5-6458-H6 |
Thanks for the replies. So Das4x4 you got the H7, thanks for clarifying that it has been way confusing for the last few days as I've been searching for a pair. Thank again. |
|
| Author: | das4x4 [ Thu Aug 12, 2010 1:39 pm ] |
| Post subject: | Re: Bilstein reference Question. F4-BE5-6458-H6 |
A shot of the H7 shocks. The Bilstiens fit fine. No spacers needed. Only a few local miles on them at this time, but a better feel of the road over the SkyJacker Hydros. Road trip to Virginia Beach this weekend. Approx 1200 miles round trip. I'll post back on them then, but I don't think Ill be disappointed  
|
|
| Author: | Scar0 [ Fri Aug 13, 2010 7:01 am ] |
| Post subject: | Re: Bilstein reference Question. F4-BE5-6458-H6 |
Purdy! Great info folks. Thanks |
|
| Author: | RRiveraKK [ Sat Aug 14, 2010 3:31 am ] |
| Post subject: | Re: Bilstein reference Question. F4-BE5-6458-H6 |
Those look good and love the looks of the spare down there. Wow I just ordered my shocks I got a pretty good deal I think. I tried calling Marlin and left a message but could not wait any longer. I ordered them from www.ajusa.com for $140.00 the pair, it had free shipping and they had a 10% on orders over a $100 till Aug 31,2010. I'm glad to hear there is no spacers needed, will make the install easier, I hope  .Thanks for the pics |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|