LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

RE: Quick-Release door removal mod
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=54843		 Page 1 of 1
Author:  clacker [ Tue Aug 10, 2010 6:12 pm ]
Post subject:  RE: Quick-Release door removal mod
i know i remember reading SOMEwhere in here that someone was trying to rig themselves something like this... can someone direct me to the post of this? or if you are the fella that was planning to do this and are reading this, PM me!
Author:  Jeepin_it_real [ Tue Aug 10, 2010 8:21 pm ]
Post subject:  Re: RE: Quick-Release door removal mod
i forget the ctual post name but the subject got moved to the libertys being uni-body and having issues with taking the doors off. although there is a thread on another forum and its been mentioned here about a WJ that made half doors, he bought stock doors, cut em up and reinforced the outer edges... that may be an option if you can find a KK at a junk yard without much damage to the doors
Author:  RRiveraKK [ Wed Aug 11, 2010 11:59 am ]
Post subject:  Re: RE: Quick-Release door removal mod
Try this one viewtopic.php?f=88&t=53441&start=0&hilit=doors+off . I'm not sure if that is what you are looking for but it is related.
Author:  audiboy86 [ Wed Aug 11, 2010 3:55 pm ]
Post subject:  Re: RE: Quick-Release door removal mod
You could do it just rig up some quick release pins with a carter pin to hold it in there. Drill your old ones out including the one holding the door assit and replace them all. Next just wire in the quick disconnects for the wiring harness and you can remove them easily every single time.
Author:  RRiveraKK [ Wed Aug 11, 2010 6:33 pm ]
Post subject:  Re: RE: Quick-Release door removal mod
Very important if you do it. We would like a write up :mrgreen:

I would be concerned of the flex (damage the unibody).
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/