I did this a while ago to try and find a rattle in my dashboard. NOTE: This is just for reference and i WILL NOT be held responsible for ANYTHING that might happen if you attempt this. If you’re going to, disconnected the battery and let it sit for at least 15 minutes to discharge the system.
First off comes the top cover above airbag using one of those plastic pry tools
Then the middle
Then these two screws
Then this screw
Then the front peels down
The the screws holding on the OH Sh*t Bar
Airbag almost out
Airbag out
Airbag itself
BackView
SideView
Connection for side of bag
Im sure i forgot some step since i did this a while ago