| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| has anyone experienced any banging when lifted? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=59302 |
Page 1 of 1 |
| Author: | hislop [ Sat Mar 05, 2011 6:28 pm ] |
| Post subject: | has anyone experienced any banging when lifted? |
So this has been going on for months and me and my friend cannot find or fix the problem, I have the JBA 4 inch lift and every time i take a sharp turn or hit a little bump on my right front wheel something clinks, i have plenty of a-arm clearance, i cut out the notches for the a-arms and i can see no wear and tear from the noise itself, has anyone heard of this before? this is the one thing keeping me from off roading, i don't want people staring and saying "oh that doesn't sound too good", our latest guess is that it could be the sway bars, i'll post pictures if needed |
|
| Author: | Pote [ Sat Mar 05, 2011 6:55 pm ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
Quote: Post subject: has anyone experienced any banging when lifted? yes...the girls LOVE that mod!!! sorry couldnt resist.
|
|
| Author: | bhc04 [ Sat Mar 05, 2011 7:09 pm ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
Pote wrote: Quote: Post subject: has anyone experienced any banging when lifted? yes...the girls LOVE that mod!!! sorry couldnt resist.Hey, you took the words right out of my mouth!
|
|
| Author: | hislop [ Sat Mar 05, 2011 7:14 pm ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
I was waiting for someone to post that lol |
|
| Author: | At The Helm [ Sat Mar 05, 2011 7:50 pm ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
Have you pulled off that wheel and looked for any metal on metal contact marks? I would look at the swaybar, end links, tie rod, and make sure the strut tower nuts and clevis bolts are torqued properly. |
|
| Author: | ATXKJ [ Sun Mar 06, 2011 9:42 pm ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
lots of folks have had noises after a lift - check all bolts front and rear to make they were tightened properly and that includes the nuts on the top of the struts (see if there's any movement) and make sure the sway bars were loosen and re-tighten after it was sitting on the ground - if it was still in the air - they'll make noise |
|
| Author: | DoubleK [ Mon Mar 07, 2011 3:36 am ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
i have the banging too (esp over bumps). i have a 3.5" RK lift and its a stiff ride, im tryna figure out the noise too.... |
|
| Author: | DirtyKK [ Mon Mar 07, 2011 6:23 am ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
hislop, do you have the a-arms also? also does it do it while sitting still and turning the steering back and forth either way? rachael i would venture to guess yours is spring/a-arm contact. i had it with my RK lift. |
|
| Author: | DoubleK [ Mon Mar 07, 2011 6:47 am ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
DirtyKK wrote: hislop, do you have the a-arms also? also does it do it while sitting still and turning the steering back and forth either way? rachael i would venture to guess yours is spring/a-arm contact. i had it with my RK lift. yea Matt, it seems like it. either i get my new JK or i get the 4" JBA lift hmmmm
|
|
| Author: | 501 [ Mon Mar 07, 2011 11:51 am ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
I had the 'banging' noise too and found the problem was the sway bar bolts. (re-tighten them like said above) now that it's back on the ground. |
|
| Author: | hislop [ Mon Mar 07, 2011 2:31 pm ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
i do have the INSANE A-arms, i have loosened and tighten the sway bar bolts a bunch of times, i'll go out and try it again now |
|
| Author: | FDez [ Mon Mar 07, 2011 4:06 pm ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
Mine has it too but I also have the RK lift without JBA A-arms. |
|
| Author: | hislop [ Mon Mar 07, 2011 11:23 pm ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
so i turned around the sway bars and i think it has been fixed, i just drove around the block once and no noise, the real test will be going to work in the morning |
|
| Author: | hislop [ Tue Mar 08, 2011 1:22 pm ] |
| Post subject: | Re: has anyone experienced any banging when lifted? |
it was a dream driving to work without having to her that bang while pulling out of the driveway |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|