| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Blacking Headlights without an oven? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=59467 |
Page 1 of 1 |
| Author: | CollinKK [ Mon Mar 14, 2011 10:32 am ] |
| Post subject: | Blacking Headlights without an oven? |
Hey guys. I was checking out some past posts about blacking out the headlights and I'm going to do this next weekend. I was wondering though, would a hair dryer work? My "tuner" buddies tell me that a lot of them do the same and just use a hair dryer. I have a heat gun, but I think that would get too hot since its for shrink-wrapping. Just wondering about any other opinions of this. It seems safe but I'd always rather not use a kitchen appliance for mechanical work. |
|
| Author: | infernicus [ Mon Mar 14, 2011 10:40 am ] |
| Post subject: | Re: Blacking Headlights without an oven? |
The oven method has been used, and used and used successfully many times. A hair dryer might work, but you're only able to heat one area of the rubber seal at a time. I say try it, see what happens. It might work great, hot enough to break the seal, but no where hot enough to melt the plastic. 
|
|
| Author: | Mike08Liberty [ Mon Mar 14, 2011 3:52 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
A heat gun may work if your careful but I would bed it will take a long stupid time. I don't think a hair dryer will heat it up enough. The oven method is very easy to use and will be the fastest. |
|
| Author: | hislop [ Mon Mar 14, 2011 8:53 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
i've recently done the oven, i'll admit it seemed sketchy but it was simple and well worth it, just make sure u use foil on the pan |
|
| Author: | korruptor55 [ Tue Mar 15, 2011 8:26 am ] |
| Post subject: | Re: Blacking Headlights without an oven? |
I wonder who was the first person who used an oven for that, and what they were thinking as they slid their headlight into it... |
|
| Author: | hislop [ Tue Mar 15, 2011 1:30 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
korruptor55 wrote: I wonder who was the first person who used an oven for that, and what they were thinking as they slid their headlight into it... 
|
|
| Author: | bhudha1 [ Tue Mar 15, 2011 3:33 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
I need to ask  have any of you seen any clowding on the lenses? Thats what holding me back and the $240 bucks for new ones.
|
|
| Author: | hislop [ Tue Mar 15, 2011 4:29 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
no clouding at all on my end 
|
|
| Author: | bhudha1 [ Tue Mar 15, 2011 4:54 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
nice!! |
|
| Author: | hislop [ Tue Mar 15, 2011 9:22 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
just a little fyi- i used silicon to close it back up, no moisture at all |
|
| Author: | CollinKK [ Tue Mar 15, 2011 9:25 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
Ugh I can't wait to get this done. Gonna just go with the oven since the majority seems to think so. P.S. you were right the hair dryer only gets to like 175 steadily so that probably wouldn't cut it. |
|
| Author: | CollinKK [ Thu Mar 17, 2011 3:53 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
Success! Followed the how to all except for the oven. Ended up using my heat gun and it made it very very easy to slowly work my way around. I'll say although it took me about 20 min per light, I was able to remove the entire old seal and replace it with GE gasket silicone. Its also true that this only cost 10.28 |
|
| Author: | DetroitKK [ Thu Mar 17, 2011 7:15 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
Nice! I'm glad to know a heat gun works! When I did it in the oven it was a real PITA, but I might consider going at it again with my heat gun and applying a glossy coat over my flat black... |
|
| Author: | CollinKK [ Fri Mar 18, 2011 10:00 am ] |
| Post subject: | Re: Blacking Headlights without an oven? |
I used satin black for mine. I have to buy a new camera charger or else I'd post up some pictures. |
|
| Author: | Luny421 [ Fri Apr 29, 2011 7:34 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
I'm new here...can someone point me to the "how to" for blacking out the headlights? I'm interested, but i want to see what i'm getting myself into before i get too excited about it. Any help is appreciated. |
|
| Author: | hislop [ Fri Apr 29, 2011 7:50 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
here you go, very easy to follow, welcome to the forum viewtopic.php?f=88&t=55424&hilit=Headlight+Housing+Painted+Black |
|
| Author: | CollinKK [ Sat Apr 30, 2011 8:31 am ] |
| Post subject: | Re: Blacking Headlights without an oven? |
Luny, it can seem slightly intimidating at first looks but once you make that first step. I.E. getting the grill off and headlights out. It boosts your confidence immesnsely. Make sure you wipe the inside of the cover so it still looks clean. |
|
| Author: | black and blue [ Thu May 05, 2011 11:08 pm ] |
| Post subject: | Re: Blacking Headlights without an oven? |
Hey Guys, I think i'm going to try to do this mod next week. I noticed that DetroitKK did end up blacking out his turn signals. I was thinking about doing the same to my turn signals, but my KK has the chrome grill, so I'm not sure I will need to black them out. Just blacking out the headlights will give it the Jet look:  I was wondering if anyone has blacked out their headlights AND turn signals WITH the chrome grill? I'm just interested in seeing some pictures of it before I go painting the turn signals. Thanks! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|