I know some people have done this in the KJ forum but has anyone done it here? I was trying to draw up some pictures as to what it would look like (although I was using MS Paint so it didn't turn out too great). But here's the ideas I'm running with right now... I think I like JUST the flares right now, but it may just be because of my crappy reproduction of the rest
Just Flares:
Flares + Rockers:
Flares and Rockers+:
Also the stock image if someone else wants to have a go at it...
Also, I'd prefer this be an at home project to save some $$. I've been reading that Herculiner works well as long as you do enough prep work before (scuffing the crap out of the plastic).
kskj ought to recall that as he was standing right there). Use a plastic flat bladed tool to carefully pinch in one side of the arrow head of the (6), starting at the passenger door side and work your way down to the (3) lower and harder to remove black clips. It might be a lot easier to use a small flat bladed screw driver to try to get the small tabs on each side of these clips pushed into the inside of the rear flare to get them to release from the flare and then after the flare is removed, then you could remove these (3) p.i.t.a. clips from the KK's rear bumper.
)