| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Need help with tire size http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=61324 |
Page 1 of 1 |
| Author: | Capp08 [ Tue Jun 21, 2011 8:59 pm ] |
| Post subject: | Need help with tire size |
New to the site and have found a lot of useful info here, but just have one question. Is anyone running a 255/65/16 on a stock 08 Liberty? I have read that I can go with 245/70/16's with no problems, but would like the slightly wider 255's. They are the same height as the stock 235/70/16's just about 3/4" wider. Any help is appreciated! Thanks |
|
| Author: | Mike08Liberty [ Wed Jun 22, 2011 8:04 am ] |
| Post subject: | Re: Need help with tire size |
I ran 255/65/16 General Grabber AT2's with a lift and had some very slight minor rubbing on full lock. So my guess would be you will have a lot of rubbing with no lift. |
|
| Author: | Capp08 [ Mon Jun 27, 2011 10:44 pm ] |
| Post subject: | Re: Need help with tire size |
Thanks for the reply. I figured that might be the case. |
|
| Author: | CollinKK [ Thu Jun 30, 2011 6:35 pm ] |
| Post subject: | Re: Need help with tire size |
I actually just put the General Grabber AT12s on my stock 08 235/75/16 and there's no rubbing at all. I dig 'em |
|
| Author: | Senshng [ Mon Aug 22, 2011 11:45 pm ] |
| Post subject: | Re: Need help with tire size |
I just put Hankook DynaPro ATM RF10 P-Metric 245/75R16 109T's on my 2008 KK Sport 4X4 with stock suspension and there is no rub with the wheel hard right or left forward or reverse. Looks really cool. I will be adding a Daystar 2" lift to get more clearance in general, but the tires work with the stock suspension and they are on sale at Discount Tires for $113 right now. You gotta dig that. |
|
| Author: | Jeepin_it_real [ Tue Aug 23, 2011 2:40 am ] |
| Post subject: | Re: Need help with tire size |
i ran a 255/70/16 with minimal rubbing at stock height |
|
| Author: | cgass [ Tue Aug 30, 2011 9:25 pm ] |
| Post subject: | Re: Need help with tire size |
Mike08Liberty wrote: I ran 255/65/16 General Grabber AT2's with a lift and had some very slight minor rubbing on full lock. So my guess would be you will have a lot of rubbing with no lift. What size lift were you running? |
|
| Author: | black and blue [ Wed Aug 31, 2011 5:53 pm ] |
| Post subject: | Re: Need help with tire size |
Jeepin_it_real wrote: i ran a 255/70/16 with minimal rubbing at stock height can you describe "minimal rubbing"? where you running stock rims, and did you have any spacers? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|