Here is a visual clarification of what i was talking about.
Two on top of the spring:
Daystar spacer on bottom:
So i guess technically i dont have any extra iso's, but i sorta do.
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Adding ISO to rear spring w/ Daystar lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=61597 |
Page 1 of 1 |
| Author: | hfdsod [ Sun Jul 10, 2011 5:16 pm ] |
| Post subject: | Adding ISO to rear spring w/ Daystar lift |
'08 KK with 2" Daystar and 245/75/16 tires. I have noticed that it looks like the front of the vehicle is slightly higher than the back. "Atthehelm" helped me with what I need to do to raise the back up. Just wondering if anyone else has added ISO's to the rear, and if so how many did you use total on each side |
|
| Author: | DirtyKK [ Sun Jul 10, 2011 5:40 pm ] |
| Post subject: | Re: Adding ISO to rear spring w/ Daystar lift |
i have two extra isos on the driver side to level out the rear of mine. one on top, one on bottom and have had no issues. |
|
| Author: | At The Helm [ Sun Jul 10, 2011 7:41 pm ] |
| Post subject: | Re: Adding ISO to rear spring w/ Daystar lift |
Here is a visual clarification of what i was talking about. Two on top of the spring: Daystar spacer on bottom: So i guess technically i dont have any extra iso's, but i sorta do. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|