| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Euro Spec Tail lights, 2nd (bottom) light http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=63401 |
Page 1 of 1 |
| Author: | wrong36 [ Fri Oct 28, 2011 5:03 pm ] |
| Post subject: | Euro Spec Tail lights, 2nd (bottom) light |
i've read that the european spec tail light has a bottom light bulb [rear fog lamp?], and the US tail light DOES have the hole for the bottom light bulb not being used.  i'd like to have that bottom light bulb, rear fog lamp? i've seen only 1 other person do this. is it easy to do? does the US wiring harness allow for it? |
|
| Author: | infernicus [ Fri Oct 28, 2011 5:31 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
The "hole" isn't exactly there. There is plenty space for a light bulb inside. The wiring harness does not have the wire there. I think the best way to do it is drill a hole in the back, and mount up any kind of bulb you want to. I've always wanted to do it. Good luck! 
|
|
| Author: | gtommec [ Fri Oct 28, 2011 5:39 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
infernicus is exactly right, the hole is not there but there is a dummy spot where the socket goes, you will have to drill the back of the fixture to install a socket/lamp. The wiring is also not there, if you want to just hook it up as an extra parking lamp or turn signal (or both) you would have to splice your new socket into the corresponding wires. If you actually want a rear fog lamp you will have to get a switch and run the wires up to the dash. Also note that the US models have a retroreflector on the lens at the bottom where the EU models do not so the lamp will not be as bright on yours as it would on the EU model, but it will still shine through fine. On my KJ I actually turned all 4 of my taillamps on each side (Parking/Turn/Reverse/Fog) into dual-filament parking and brake/turnsignals, in other words they all come on for my parking lights (low filament) and brake and turn signals (high filament) |
|
| Author: | infernicus [ Fri Oct 28, 2011 5:54 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
// off-topic-ish gtommec wrote: On my KJ I actually turned all 4 of my taillamps on each side (Parking/Turn/Reverse/Fog) into dual-filament parking and brake/turnsignals, in other words they all come on for my parking lights (low filament) and brake and turn signals (high filament) Thats cool, I'd love to see a video of that. \\ Back on topic Cool, lol. |
|
| Author: | Bmxer524 [ Fri Oct 28, 2011 6:29 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
I think John, Jeepin_it_real, did the 2nd light to his truck. You could always try asking him too. |
|
| Author: | infernicus [ Fri Oct 28, 2011 11:16 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
Bmxer524 wrote: I think John, Jeepin_it_real, did the 2nd light to his truck. You could always try asking him too. Affirmative. |
|
| Author: | wrong36 [ Sat Oct 29, 2011 1:38 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
yup, Jeepin_it_real is the whole reason i even knew this was possible [thanks!]. just looking at all the options to do it now. |
|
| Author: | hrogi [ Mon Oct 31, 2011 12:02 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
Post pics when you are done and a parts list.. I was thinking of making that a second light for when the brakes are applied... I am vey unhappy that did not do that from the start.... I would love an easy to follow guild to adding in light there. Can you tap into the wiring that is already there? or will that make the light dimmer? I should know, this, but I do not.. |
|
| Author: | wrong36 [ Sat Nov 05, 2011 3:08 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
if anyone has any info on how to do this: pics, specs, parts list, etc... thanks! in the mean time, here's the inspiration [thanks jeepin_it_real]: 
|
|
| Author: | ken5124 [ Sun Nov 13, 2011 11:15 am ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
I just added the second tail lamp option on my 2009 yesterday. I found some 2 wire sockets, metal base, at an auto parts store, which clip into the hole I drilled into the headlight housing. The bulbs are 2 filament # 2057. I attached a ground wire to the base and ran the other 2 lines, one for the dim filament to the parking brake line at the feed ( use a tester to find out which one, and t-tapped the line. The second line for the brighter of the 2 filaments, I wired the same way , but this time tapped it into the brake light line at the factory plug To determine which is the brighter of the 2 filaments, I put the bulb in , held the metal socket against the negative post of a 12 volt battery and tested both of the lines to see which one would shine brighter This does not dim the other lights at all. Taped the connections up and good to go. I could probably be convinced to take it apart and get some pictures if you want. Ken |
|
| Author: | hrogi [ Sun Nov 13, 2011 5:00 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
If you could list the part names and numbers of the light socksts that would be great. and any pics and wire colors you tapped would be helpful.. You could make it an article for the tech section.. |
|
| Author: | Jeepin_it_real [ Mon Nov 14, 2011 11:55 am ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
that's my truck int he picture. PM me if ur interested I can explain it. I havent had time to do a HOW TO even though I have been meaning to wrong36 wrote: if anyone has any info on how to do this: pics, specs, parts list, etc... thanks!
in the mean time, here's the inspiration [thanks jeepin_it_real]: |
|
| Author: | ken5124 [ Mon Nov 14, 2011 8:04 pm ] |
| Post subject: | Re: Euro Spec Tail lights, 2nd (bottom) light |
How to added to Forum Enjoy ! Ken |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|