09 liberty sub and amp install question

smigelskijk · **Posted:** Mon Dec 19, 2011 10:20 am

We'll my neighbor gave me two 10" subs with a amp and I have no idea how to install in my 09 liberty. If anybody could help me in doing this that would be cool. Also I am going to use the stock radio and how do you get it out? Thanks for any help!

At The Helm · **Posted:** Mon Dec 19, 2011 10:39 am

Iirc there is an adapter made by PAC that gives you preamp outputs but also has a lot of interference so it sounds hissy. Better off just getting an aftermarket head unit, because pac stuff is expensive and almost all afyermarket hu's come with preamp outputs and a remote wire.
Removal- just pull on the top storage area above the vents and carefully pry the two carbon fiber colored strips. The strips dont come all the way off, they are just attached at the top. Once that part is loosened just firmly pull the entire bezel toward you. There are like six connectors that pop apart. Undo the wire harnesses for ac, lighter socket, and switch bank. You may have to put it in"drive" w your foot on the brake. There are only four philips head screws holding the factory stereo in.

Diggerfreek did a write up in the tech section on this that may be helpful.

smigelskijk · **Posted:** Mon Dec 19, 2011 11:40 am

Thanks so the factory radio is really not a good option.

09 liberty sub and amp install question

Who is online