LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

31s on stock kk
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=65718
Page 1 of 1

Author:  black_diesel [ Fri Mar 09, 2012 9:04 pm ]
Post subject:  31s on stock kk

hey guys!...i have a kk and today i took my boyfriends 31x10.50 and put on my stock liberty with the stock tj rim and it did not scrub when i turned it left and right and then i took his 31x10.50 with his mickey thompson side biters on and it scrubbed when i turned left and right but its back spacing is like 3.5in. so im wandering if i would be ok with a 245/75/16 all terrain on a 4.25 backspace pro comp rim. I also ordered a 2in lift for it tonight.
[img][IMG]http://i1048.photobucket.com/albums/s363/423aarona/Facebook/Mobile%20Uploads/428644_337097349675881_100001268560188_1046758_361806079_n.jpg[/img][/img]

Author:  black_diesel [ Fri Mar 09, 2012 9:10 pm ]
Post subject:  Re: 31s on stock kk

http://i1048.photobucket.com/albums/s363/423aarona/Facebook/Mobile%20Uploads/428644_337097349675881_100001268560188_1046758_361806079_n.jpg

Author:  black_diesel [ Fri Mar 09, 2012 9:13 pm ]
Post subject:  Re: 31s on stock kk

http://i1048.photobucket.com/albums/s363/423aarona/Facebook/Mobile%20Uploads/424523_337100279675588_100001268560188_1046762_1677846272_n.jpg

Author:  black_diesel [ Fri Mar 09, 2012 9:26 pm ]
Post subject:  Re: 31s on stock kk

Those pictures are with a 15in rim also. The 15in rim is very close to my brakes.

Author:  cgass [ Fri Mar 09, 2012 9:49 pm ]
Post subject:  Re: 31s on stock kk

Looks like if you stuff the tires at all you'll tear up the wheel wells. You might get rubbing on the pinch weld in reverse too. Some of the guys have run 31s with an OME lift and they've still had rubbing issues. I can't imagine you wouldn't have any at stock height

Author:  black_diesel [ Fri Mar 09, 2012 9:57 pm ]
Post subject:  Re: 31s on stock kk

I ordered a 2in lift tonight im goin to run a 245/75/16 which is a littlesmaller than his 31. Im wonderin if ill rubbing issues while turning with a 245/75/16 on a rim backspaced 4.25in. I had no fitment issue with the 31 on his stock tj rim other than my calliper the jeep turned fine with no rubbing. What im asking is if it would rub bad on 245/75/16's with a rim that will stick out alot more like a steel rim with backspacing of 4.25 and a 2 in lift

Author:  VegasDragger45 [ Sat Mar 10, 2012 6:48 pm ]
Post subject:  Re: 31s on stock kk

Not sure if it will rub with those specs but I run BFG all terrains 245/75/16 with stock wheels and have no rubbing at all. It looks like if they stick out about an inch or so it should be ok with no rubbing.

Author:  musclezmarinara [ Sun Mar 11, 2012 12:02 am ]
Post subject:  31s on stock kk

Looks awesome ! Great job what's your wheel setup ?


Musclez Marinara
Marco@acor4x4.com

Author:  Jeepin_it_real [ Mon Mar 12, 2012 11:45 pm ]
Post subject:  Re: 31s on stock kk

all i will say is good luck... any trimming you dont do... those tires will... may fit under no compression but i bet when you make a sharp turn you will hear those tires bite

Author:  E2 [ Tue Mar 13, 2012 9:15 am ]
Post subject:  Re: 31s on stock kk

Ohhh yeah they will bite in compression. Have fun we want to see some pics.

Author:  Lowridah313 [ Sat Mar 17, 2012 9:54 am ]
Post subject:  Re: 31s on stock kk

Does anyone have pics of how close a 15" wheel is to the caliper? Like what type of clearance are we talking about?

Author:  Jeepin_it_real [ Sat Mar 17, 2012 11:11 am ]
Post subject:  Re: 31s on stock kk

a lot of us have tested and tried... it's just too close... WAY WAY too risky to run a 15"

Author:  Lowridah313 [ Sun Mar 18, 2012 8:50 pm ]
Post subject:  Re: 31s on stock kk

Jeepin_it_real wrote:
a lot of us have tested and tried... it's just too close... WAY WAY too risky to run a 15"


Not trying to be rude, but that doesn't tell me anything. I'm looking for facts, not personal opinions.

Author:  DirtyKK [ Sun Mar 18, 2012 10:15 pm ]
Post subject:  Re: 31s on stock kk

15s will fit. not comfortably for some. just hope you dont bend a rim. see here...

viewtopic.php?f=88&t=43042&hilit=15x7&start=1960

Author:  Lowridah313 [ Mon Mar 19, 2012 6:21 am ]
Post subject:  Re: 31s on stock kk

Thanks DirtyKK. Thats exactly what I was looking for!

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/