Why spacers?
Then need more lift than a Daystar spacer gives you to run 32s
yes they may fit driving on a smooth road but
plus to regear
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 32s with spacers? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=66013 |
Page 1 of 1 |
| Author: | musclezmarinara [ Sat Mar 24, 2012 12:10 am ] |
| Post subject: | 32s with spacers? |
Wondering how big I could go with these installed 32s??? Jeep 1.25" Thick Wheel Spacers These 1.25" thick, 5 on 4.5", 6061T6 aluminum spacers are an easy way of spacing out front and rear Jeep XJ, YJ, TJ, ZJ, KJ and KK axles. Each kit comes with 2 wheel spacers, 10 standard wheel studs (pre-installed), 10 lugnuts, and Loctite. The wheel spacers are anodized in dark blue, which is a double anodizing process for twice the corrosion resistance. In addition, each wheel spacer is wheel and hub centric for a perfect fit. Proudly made in the USA. |
|
| Author: | tommudd [ Sat Mar 24, 2012 1:07 am ] |
| Post subject: | Re: 32s with spacers? |
Why spacers? Then need more lift than a Daystar spacer gives you to run 32s yes they may fit driving on a smooth road but plus to regear |
|
| Author: | norcalarctic [ Sat Mar 24, 2012 3:58 am ] |
| Post subject: | Re: 32s with spacers? |
From what others have said about spacers in the past has I a bit skeptical on them. That would put you at 4.25" BS, check out the Pro Comp Extreme Alloys #7028-6865 4.5"BS, 5 on 4.5BP cast black; they are 60-90 days to build, but the best looking wheel for the Arctics to match the flat black hood decal imo...If I got these, then I would paint my grill flat black too. |
|
| Author: | musclezmarinara [ Sat Mar 24, 2012 8:56 am ] |
| Post subject: | 32s with spacers? |
The new OME lift is going in Monday with the modifications I have added to the lift were looking at about 4" of lift. I'll check those wheels out and see what happens |
|
| Author: | tommudd [ Sat Mar 24, 2012 11:11 am ] |
| Post subject: | Re: 32s with spacers? |
Modifications to the lift? Installing new JBA UCA as well? |
|
| Author: | musclezmarinara [ Sat Mar 24, 2012 7:16 pm ] |
| Post subject: | Re: 32s with spacers? |
tommudd wrote: Modifications to the lift? Installing new JBA UCA as well? doing the full OME springs MD and Heavy Duty Springs Bilsteins all around terraflex bumps JBA Rear Bumps OEM 3 Rear Isos Conduit Spacers up front. couldnt shell out another 400 this time around for the JBA UCA ( i will order them in a few weeks) Also still trying to dump these Falkens not aggressive enough for my liking.... LIFT IS GOING IN MONDAY !   ANy other ideas ? Also need to get the conduit spacers anyone know the size ill need for the KK? I wont know until we pull the front apart and measure and not sure how many ill need Im thinking ill be around the 4" mark once completed This is the setup i went with viewtopic.php?f=3&t=65352 |
|
| Author: | At The Helm [ Sat Mar 24, 2012 7:32 pm ] |
| Post subject: | Re: 32s with spacers? |
They 2" conduit lock nuts. You might get away with two per side before uca contact with the stock arms. Should put you at 21.5" or so after it settles. |
|
| Author: | At The Helm [ Sat Mar 24, 2012 7:39 pm ] |
| Post subject: | Re: 32s with spacers? |
Also make sure you're rear brake lines are long enough for the springs plus 3 iso's at full flex. |
|
| Author: | musclezmarinara [ Sat Mar 24, 2012 9:46 pm ] |
| Post subject: | 32s with spacers? |
Will do wondering if i can run these bad boys  315/75 16 with spacers thats like a 32. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|