LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Finished Switch Box Console and New JET headlights!
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=69557
Page 1 of 1

Author:  mawlkrawler [ Thu Jul 12, 2012 12:10 am ]
Post subject:  Finished Switch Box Console and New JET headlights!

I've seen some threads floating around about upgrading to the JET headlights and I just finished the upgrade today. Its taken a few weeks (Between shipping and cutting and paint and more shipping) But its finally done. Enjoy the pix! I used 2 sets of DDM HID's. The headlights are Bi-zeon 6000k's(white/bluish) and the fogs are 3000k (yellow) Additionally, since the fogs are independently of the headlight switch, you can have the fogs and high beams on at the same time. Obviously only when no1 is around otherwise your going to blind them.

I started with a piece of 16 Guage steel and had someone laser cut it. Here's a pic of it after I painted it
Image

This is with the switch holders installed in it
Image

These are the switches I planned on mounting
Image

Here it is with them assembled
Image

This is after I finished the wiring. It looks like pure chaos but it works lol
Image

The finished mount from the front
Image

Here it is mounted and finished. Note I got rid of that ugly wire that ran from my compass
Image

ITS ALL ABOUT TEH STEALTH MODE!!! 8) 8) 8)
Image


Before
Image

After
Image

And with the headlights off
Image

I'll post a picture of the switches at night when it gets dark tomorrow.

Image

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/