Seat Belt Anchor Covers

lfhoward · **Posted:** Fri Jan 18, 2013 9:56 pm

While installing a heated seat kit I accidentally broke the plastic clips off both plastic seat belt anchor covers. The tabs just wouldn't release from the plastic seat trim. I tried epoxying the plastic tabs back on, but the glue won't stick and the covers won't stay on the seats without clips. I know the covers are not completely necessary, but I like the interior of my Jeep to look nice so I want to replace them.

According to the MOPAR factory parts manual, these should be the part numbers:
[drivers side]
COVER, Seat Belt Anchor
1DX41BD5AA 1 J, T, U 74 *M7 [DA]
1DX41DK2AA 1 J, T, U 74 *M7 [KA]

[passengers side]
COVER, Seat Belt Anchor
1DX40BD5AA 1 J, T, U 74 *M7 [DA]
1DX40DK2AA 1 J, T, U 74 *M7 [KA]

I can look up these part numbers on many Mopar parts websites, but the problem is I don't know what interior colors these trim pieces are. I need slate gray. Does anyone know which part numbers correspond with which interior colors? I'm hoping there is a Jeep employee on here who can help me out. (Marlon?

)

P.S. The numbers molded into the back of my broken seatbelt anchor covers do not come up as anything on Google. FWIW, they are [Left] 1364897 LH and [right] 1364900 RH. Thanks!

Here are the photos:
Drivers side:

Passengers side:

racer1 · **Posted:** Fri Jan 18, 2013 11:18 pm

There is a parts book in the tech section. At the beginning of the interior section it gives the color numbers.

lfhoward · **Posted:** Sat Jan 19, 2013 1:42 pm

Unfortunately the parts manual fails to identify the color codes. :ALONE:

I did find the answer last night after a long internet search. None of the Mopar parts sellers have both part numbers and colors. Here is a junkyard website that saved the day: http://ecautosalvage.com/how-to-find-paint-codes-and-interior-trim-codes-on-your-jeep-grand-cherokee/
They have a nice article that explains how to match Jeep interior colors in good detail.

Basically, look for the 4-digit trim code on your door jamb sticker - the one that has your VIN and your tire pressures printed on it. Here are a couple of pics from Grand Cherokees from ecautosalvage's webpage:
2000 Grand:

2004 Grand:

In my case, my trim code is M7DA. So, for my gray interior, these are the correct MOPAR part numbers for the seat belt anchor covers:
Drivers side: 1DX41BD5AA 1 J, T, U 74 *M7 [DA]
Passengers side: 1DX40BD5AA 1 J, T, U 74 *M7 [DA]

I hope this helps someone else looking to match a piece of interior trim!
--LFH

Seat Belt Anchor Covers

Who is online