| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| kk tom mudd lift question http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=74496 |
Page 1 of 1 |
| Author: | etflies1970 [ Thu Mar 14, 2013 1:04 pm ] |
| Post subject: | kk tom mudd lift question |
Why were JBA's rear spring chosen over OME. thanks again |
|
| Author: | tommudd [ Thu Mar 14, 2013 1:19 pm ] |
| Post subject: | Re: kk tom mudd lift question |
Pretty simple really OME give about 2.25-2.5 inches of lift and then you have to make up more lift with isolators etc JBAs give you 3.75-4 inch without anything else added |
|
| Author: | khalilw [ Thu Mar 14, 2013 2:30 pm ] |
| Post subject: | Re: kk tom mudd lift question |
Hi tommudd! I have a question too. If your lift gives 3'' - 3.5'' of lift, why is not a longer track bar needed like on the JBA 4'' ? How much lift can our stock track bar resist? |
|
| Author: | etflies1970 [ Thu Mar 14, 2013 2:57 pm ] |
| Post subject: | Re: kk tom mudd lift question |
Thanks tom you have been very helpful in my slow journey to get my lift where i want it. Eric |
|
| Author: | Greenwing7 [ Fri Mar 15, 2013 5:51 am ] |
| Post subject: | Re: kk tom mudd lift question |
I noticed that on the site a lot of the KK lift options are gone? Is the new Tommudd edition the replacement? seems very afordable. |
|
| Author: | TIJKK1220 [ Sat Mar 16, 2013 6:18 am ] |
| Post subject: | Re: kk tom mudd lift question |
Greenwing7 wrote: I noticed that on the site a lot of the KK lift options are gone? Is the new Tommudd edition the replacement? seems very afordable. They aren't gone, they have been moved to a secondary link Enjoy  http://jeeplibertyliftkits.com/jeep-lib ... -2012.html Tommudd put a good kit together but if you were looking for the JBA kits they are still there. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|