Why were JBA's rear spring chosen over OME. thanks again

_________________
2011 Liberty Renegade, Command Trac II, Ironman 4x4 springs front, OME Springs rear, Flowmaster 40, Cooper AT3 245/75r16

Pretty simple really
OME give about 2.25-2.5 inches of lift and then you have to make up more lift with isolators etc
JBAs give you 3.75-4 inch without anything else added

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Hi tommudd!

I have a question too.

If your lift gives 3'' - 3.5'' of lift, why is not a longer track bar needed like on the JBA 4'' ?

How much lift can our stock track bar resist?

Thanks tom you have been very helpful in my slow journey to get my lift where i want it.
Eric

_________________
2011 Liberty Renegade, Command Trac II, Ironman 4x4 springs front, OME Springs rear, Flowmaster 40, Cooper AT3 245/75r16

I noticed that on the site a lot of the KK lift options are gone? Is the new Tommudd edition the replacement? seems very afordable.

_________________
2005 CRD new turbo @100k, engine rebuilt @ 113k, Purchased with 115k now 135k.

They aren't gone, they have been moved to a secondary link
Enjoy
http://jeeplibertyliftkits.com/jeep-lib ... -2012.html

Tommudd put a good kit together but if you were looking for the JBA kits they are still there.

_________________
2008 Black Liberty Sport 4X4 - Red and Black wheels and trim - Painted headlight bezels - Magnaflow Exhaust.