LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

IAC Valve Location
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=75321		 Page 1 of 1
Author:  Gageraid [ Tue May 21, 2013 7:29 am ]
Post subject:  IAC Valve Location
Good day, everyone. I was wondering if someone could steer me in the right direction in order to find the IAC Valve on the 3.7L engine. A picture would be great. Thanks in advance.
Author:  lfhoward [ Tue May 21, 2013 7:43 am ]
Post subject:  Re: IAC Valve Location
Hi Gageraid, I think I read that once the 3.7 went to drive by wire in 2007, the IAC is no longer a separate part that can be taken out and cleaned. I think it is embedded in the throttle body somewhere and is not serviceable on its own. Someone please correct me if I'm wrong.
Author:  tjkj2002 [ Tue May 21, 2013 12:33 pm ]
Post subject:  Re: IAC Valve Location
Yep no IAC in the throttle by wire throttle body.
Author:  Gageraid [ Tue May 21, 2013 7:07 pm ]
Post subject:  Re: IAC Valve Location
Thanks for the replies. I did a ton of searching. Is there anything similar to an IAC valve on this engine I can clean?
Author:  DREDnot [ Wed May 22, 2013 4:25 am ]
Post subject:  Re: IAC Valve Location
Just from looking at it, I think it has a servo driven throttle plate.
That big gearbox on the passenger side of the throttle plate does an approximation of what the throttle cable used to do

Image
Author:  Gageraid [ Wed May 22, 2013 12:11 pm ]
Post subject:  Re: IAC Valve Location
The more I learn about this engine, the more questions I have. Seems like the 3.7L in the KK is not complicated. Just digging around for things I can check and clean to keep things running 100 percent and help others out.

Thanks again for the replies. Had a feeling Troy would respond to it.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/