| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| rear ome springs http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=75790 |
Page 1 of 1 |
| Author: | carlosburitica [ Sat Jun 29, 2013 2:10 pm ] |
| Post subject: | rear ome springs |
i finished ome lift, and so far i am happy but when i was installing the lift i questioned to my self about the rear MD springs. they look king of like the OEM, well they did give me a lift, but i think they were supposed to be longer don't they??? left OEM right OME 2731 
|
|
| Author: | crippled [ Sat Jun 29, 2013 3:37 pm ] |
| Post subject: | Re: rear ome springs |
i think its the material they are made of which is less prone to sagging and squishyness but mine were the same way. |
|
| Author: | tommudd [ Sat Jun 29, 2013 5:04 pm ] |
| Post subject: | Re: rear ome springs |
Its not how long they are but the rating stock springs for the front for example are rated at 310, OME 927s are 400 so while they may appear to be about the same height they will hold up more weight without sagging resulting in more lift |
|
| Author: | carlosburitica [ Sat Jun 29, 2013 10:11 pm ] |
| Post subject: | Re: rear ome springs |
now. my front is sitting at 21 1/2 on both sides but the back...... driver side 20 1/4 and passenger side 21. so I need to gain about an inch on the back to level up with the front. what is the best way to do that. |
|
| Author: | tommudd [ Sat Jun 29, 2013 10:43 pm ] |
| Post subject: | Re: rear ome springs |
isolators |
|
| Author: | carlosburitica [ Sun Jun 30, 2013 10:04 am ] |
| Post subject: | Re: rear ome springs |
tommudd wrote: isolators can i stack two on the passenger and three on the driver side??? |
|
| Author: | crippled [ Sun Jun 30, 2013 8:46 pm ] |
| Post subject: | Re: rear ome springs |
my MD rear sat at 21.5 rear pass. and 21 rear drivers |
|
| Author: | carlosburitica [ Sun Jun 30, 2013 10:07 pm ] |
| Post subject: | Re: rear ome springs |
crippled wrote: my MD rear sat at 21.5 rear pass. and 21 rear drivers it was 21 first day. then I dropped about and inch |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|