So I'm like half way through installing my new radio and I realized that the wiring harness doesn't fit so I'm just gonna cut the OEM one and wire the radio directly. Problem is I don't know the color codes. Anyone have them?


Sent from my iPhone

_________________
Silver 2008 Jeep Liberty KK Sport
OME Springs / Bilstein Shocks / Clevis Lift / JBA Gen 5.5 UCA's
265/75/R16 Firestone Destination M/Ts / Pro-Comp Xtreme Rock Crawler Steel Wheels
ATH Steel Roof Rack Bars / RL Super Skink Rock Sliders
Hypertech Max Energy Engine Tuner

Don't cut your factory harness....just get the right adaptator. When I buy a car with aftermarket head unit I check that. If its all cut up.....no sale

Sent from my Home Phone using Tapatalk

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Totally agree! If nothing else, just tap the wires.
This is for the KA, but I believe the wires are the same on the KK.

_________________
07 KA Light Khaki, Manual trany.
2.5" Adjust-A-Strut JBA lift, Euro taillights,
Home made; Front Tilt Hood, Roof Rack, RAM Air, & CAI.
ESP Off Switch
Take a ride on the Trō side!

I ordered another harness. You guys are right. I just was being stubborn lol


Sent from my iPhone

_________________
Silver 2008 Jeep Liberty KK Sport
OME Springs / Bilstein Shocks / Clevis Lift / JBA Gen 5.5 UCA's
265/75/R16 Firestone Destination M/Ts / Pro-Comp Xtreme Rock Crawler Steel Wheels
ATH Steel Roof Rack Bars / RL Super Skink Rock Sliders
Hypertech Max Energy Engine Tuner