| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Texasrugby911's KK Build Thread http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=77240 |
Page 1 of 1 |
| Author: | At The Helm [ Sat Nov 02, 2013 5:22 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
Looks like you're getting the most out your KK. Thanks for the kind words. |
|
| Author: | mredmond [ Sat Nov 02, 2013 6:58 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
Thank you so much for posting this! Your rig really is one of the best looking KKs I've seen. And seeing you next to those JKs proves for all the haters out there that the Liberty truly is a "real" Jeep. |
|
| Author: | Gageraid [ Sun Nov 03, 2013 12:21 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
Thanks for finally making a build thread! I'm definitely guilty of talking (kind words) about your KK to some friends of mine. I didn't know your KK is stick! Even cooler! |
|
| Author: | LKWJeeper [ Sun Nov 03, 2013 1:23 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
Looks great! What did you use on the fenders? Sent from my SGH-T999 using Tapatalk |
|
| Author: | Texasrugby911 [ Sun Nov 03, 2013 1:53 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
Mredmond: I actually did more at that park that several JKs did, including a Rubicon. Albeit they were both stock, but still XD Gageraid: It has been long overdue that I shared my story with the forum. Just goes to show you, you can do anything you put your mind (and wallet) to. I still get surprised looks when people ride in my Jeep that she's a stick. Love it, don't think I'll ever drive an automatic again. JeeperSC: All I did with the fenders was sand them down, tape off the rest of the jeep, rattle can grey primer, then laid down 5-6 coats of matte black spray paint. I've never done any paint project like that, so I was pleasantly surprised to how well it turned out. |
|
| Author: | arengant [ Sun Nov 03, 2013 4:31 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
Looks good! Hope you take it with you when you come back to the states! |
|
| Author: | mredmond [ Sun Nov 03, 2013 9:24 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
That really is impressive, you'll definitely have to get some video of your rig in action sometime. Also, are you just running the straight JBA 4" kit, or did you level out the front with anything? |
|
| Author: | JeepNCrowd [ Mon Nov 04, 2013 2:24 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
You're KK looks awesome! You've beat me to the bumpers and wheels, but at least now I'll be able to see how they look in person. Hurry up and get down to SA so I can see it and we can wheel!
|
|
| Author: | mredmond [ Mon Nov 04, 2013 4:17 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
Texasrugby911 wrote: Also, I am running the adjust-a-strut 4" in the front and the bilstein 7100s in the rear. I'm actually still a bout two or so inches low in the front, I'm not too sure how to fix it, and plan to tinker with it when I get to SA *hint hint JeepNCrowd* I actually love the stance of your KK as it is now. The rake isn't too noticeable and actually looks pretty good. I ask because I've been on the ledge on shelling out for JBA's 4" kit for awhile now, and seeing yours just about has me convinced its worth the money. I think I have the same size wheels and tires as you (16x8, 4" backspace, 245/75r16) and I'm trying to get a good idea of how mine might sit if I increase the lift height without also increasing the tire size. Do you have any straight side shots of your Liberty on flat ground? |
|
| Author: | Gageraid [ Mon Nov 04, 2013 11:34 pm ] |
| Post subject: | Re: Texasrugby911's KK Build Thread |
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|