LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Rigid Industries Dually Lights - Location???
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=78360		 Page 1 of 2
Author:  nFodzy [ Thu Feb 20, 2014 7:38 pm ]
Post subject:  Rigid Industries Dually Lights - Location???
Looking into buying what the title reads soon, but cannot decide where to put them. Open opinions would be helpful! First pic shows the Dually lights where the tow hooks would go, have seen this one done before. But i dont know if I like the idea of losing the option of tow hooks in the future. The second one shoes them inserted in the bumper. I'd probably get the flush mount ones where I'd take the bumper off, cut the square exactly the same size and mount them behind/inside the bumper. Also sorry, dont know how to properly add pics yet lol http://s1367.photobucket.com/user/nFodzy/media/rigid_lights_TEST1_zpsf16e653f.jpg.html?sort=3&o=2 - http://s1367.photobucket.com/user/nFodzy/media/rigid_lights_TEST2_zps66ac191f.jpg.html?sort=3&o=1
Author:  lammarco [ Thu Feb 20, 2014 9:40 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
nFodzy wrote:
Looking into buying what the title reads soon, but cannot decide where to put them. Open opinions would be helpful! First pic shows the Dually lights where the tow hooks would go, have seen this one done before. But i dont know if I like the idea of losing the option of tow hooks in the future. The second one shoes them inserted in the bumper. I'd probably get the flush mount ones where I'd take the bumper off, cut the square exactly the same size and mount them behind/inside the bumper. Also sorry, dont know how to properly add pics yet lol http://s1367.photobucket.com/user/nFodzy/media/rigid_lights_TEST1_zpsf16e653f.jpg.html?sort=3&o=2 - http://s1367.photobucket.com/user/nFodzy/media/rigid_lights_TEST2_zps66ac191f.jpg.html?sort=3&o=1

or you can just cut open the front grill and mount them inside the 7 slots...that's was one of my plan... :seuss:
Author:  silverkk [ Fri Feb 21, 2014 12:15 am ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
Top part of bumper
Author:  At The Helm [ Fri Feb 21, 2014 2:21 am ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
I think you're best option is using the flush mount duallys/d2's on the face of the bumper, but remember there isn't any part of the factory plastic that is perfectly flat. With that said, there might be a little bit of a gap on the sides. Maybe some .25"x1" weather strip could solve that.
Author:  huntb [ Fri Feb 21, 2014 10:05 am ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
I don't think I would mount them in the plastic bumper. The bumper will flex and vibrate causing light flicker that will be super annoying. Especially offroad
Author:  At The Helm [ Fri Feb 21, 2014 4:31 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
Yeah that might be a problem with spot beams, maybe not so much if using floods.
Author:  nFodzy [ Fri Feb 21, 2014 5:14 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
Yeah I'm definitely getting the floods. But you're all right..this is going to be harder than I thought. I WOULD love a 20" lightbar so I can just mount it on top of my bumper, but I can't afford that lol.
Author:  silverkk [ Sat Feb 22, 2014 12:57 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
Image like this this is mine and it was only 140 but not ridgid but Cree LEDs less watts and more lumens works great and has a 1 year warranty
Author:  nFodzy [ Sat Feb 22, 2014 4:04 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
silverkk wrote:
Image like this this is mine and it was only 140 but not ridgid but Cree LEDs less watts and more lumens works great and has a 1 year warranty


All those lights actually look really good on your KK, especially since it's silver. So CREE is the brand name of the light bar? Also how do you like your two small dually's that you painted? :)
Author:  tommudd [ Sat Feb 22, 2014 4:35 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
All those lights actually look really good on your KK, especially since it's silver. So CREE is the brand name of the light bar? Also how do you like your two small dually's that you painted? :)[/quote]

Cree makes the individual lights/parts that make up a light bar for the cheaper brands out there. I bought some to try and was very unimpressed with them. Save your money for name brand lights and you'll be better satisfied with them. There is no comparison side to side
Author:  JeepMorrison [ Sat Feb 22, 2014 10:57 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
I build reef aquarium lights, Cree led are individual leds, as Tom said. But alot has to do with the drivers for the leds. If you have a cheap driver on crees they dont put out good lumens (par in reefs) but if you have a good solid driver then you have a good fixture.

Its just like having a corvette and a six year old driving it. Or having the corvette and having The Stig on the controls.

Notice: my other hobby info....

My reef light has 8 neutral whites, 16 royal blues, 3 uv, 4 "ocean cool white (green red light blue). No optics (120°)

Total of 32 watts of cree led power. My buddies 10 inch rigid light had 55w (or close) of leds with "combo beam" optics

His rigid light at 8inches the par was 889

My Cree/meanwell reef light had a total par 1121 at the same distance.

That proved to me that I could take a cheap led bar, place geade A batch crees and top grade drivers in the hosing and have a bad booty light for my jeep. Will I ever do it? NOPE, I have more $$ in my reef light than a 40" rigid led bar.

When I buy a led bar, I will get a hanma or something. I have enough led crap around my house to fix them, including the "cheap" drivers they use. (Upgraded a buds led bar on his JK to use meanwell drivers) that light was bright!!!



Sent with the power of children's screams!!!
Author:  nFodzy [ Sun Feb 23, 2014 1:36 am ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
nFodzy wrote:
silverkk wrote:
Image like this this is mine and it was only 140 but not ridgid but Cree LEDs less watts and more lumens works great and has a 1 year warranty


All those lights actually look really good on your KK, especially since it's silver. So CREE is the brand name of the light bar? Also how do you like your two small dually's that you painted? :)


Is yours a flood only, or combo?
Author:  silverkk [ Sun Feb 23, 2014 2:06 am ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
Combo
Author:  silverkk [ Sun Feb 23, 2014 2:07 am ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
nFodzy wrote:
silverkk wrote:
Image like this this is mine and it was only 140 but not ridgid but Cree LEDs less watts and more lumens works great and has a 1 year warranty


All those lights actually look really good on your KK, especially since it's silver. So CREE is the brand name of the light bar? Also how do you like your two small dually's that you painted? :)
no there off of amazon and the led chips the produce the light are Cree best LEDs to have and love the duallys and yes painted them
Author:  silverkk [ Sun Feb 23, 2014 2:10 am ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
Tom you don't need to buy crazy expensive lights I put all my lights next to a jk with ridgid ones and there the same bright ness except my top bar but u can barley notice that and there good quality if you know what to look for and know what u need
Author:  tommudd [ Sun Feb 23, 2014 9:47 am ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
Yes I've tested various brands also and the cheaper ones had a noticeable difference.
Like a lift kit or anything else you get what you pay for.
Author:  silverkk [ Sun Feb 23, 2014 7:06 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
I payed a cheap price but nut dirt cheap right in the middle and there prefect plenty of light and almost identical to ridgid
Author:  riptricket [ Wed Jun 04, 2014 11:45 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
So are the ones on eBay for $200 to $300 or so any good?
Author:  silverkk [ Thu Jun 05, 2014 2:59 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
There good I love mine it was 350
Author:  silverkk [ Thu Jun 05, 2014 3:00 pm ]
Post subject:  Re: Rigid Industries Dually Lights - Location???
For a 50 inch bar and 170 for 20 inch and 6 for square pods that's are like d2s all Cree leds
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/