Transmission not shifting out of 2nd gear

geraldthejeep · **Joined:** Sun Jul 01, 2012 9:58 pm **Posts:** 8

I recently unplugged my computer to install my lift and after everything is hooked back up the transmission will not shift out I second gear when it is in drive. Any suggestions to what this problem could be?

Sent from my iPhone using Tapatalk

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

Did you install any jet chip or any programmer?

geraldthejeep · **Joined:** Sun Jul 01, 2012 9:58 pm **Posts:** 8

I actually ended up finding a piece of metal in one if the connections that apparently did not allow a solid connection. I took the debris out and everything is good now.

Sent from my iPhone using Tapatalk

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

That's what I figured. I had the jet chip installed a while back but I guessed I didn't push it hard enough. It became loose after a while and my jeep won't shift to other gears. Glad you fixed it... :JEEPIN:

Transmission not shifting out of 2nd gear

Who is online