| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Rear long arms http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=79456 |
Page 1 of 1 |
| Author: | silverkk [ Wed Jun 25, 2014 10:37 pm ] |
| Post subject: | Rear long arms |
Is there rear long arms for the kks |
|
| Author: | Bmxer524 [ Wed Jun 25, 2014 11:11 pm ] |
| Post subject: | Re: Rear long arms |
I don't think so. Adjustable control arms would be pretty nice, especially for some of the guys running 4-6" springs in the rear. |
|
| Author: | silverkk [ Thu Jun 26, 2014 5:30 am ] |
| Post subject: | Re: Rear long arms |
Yea and would add so much to the lifts |
|
| Author: | tommudd [ Thu Jun 26, 2014 7:11 am ] |
| Post subject: | Re: Rear long arms |
Wouldn't help any at all, unless you had adjustability at the top as well , then you'd more than likely need longer driveshaft if you started messing with that |
|
| Author: | silverkk [ Thu Jun 26, 2014 5:42 pm ] |
| Post subject: | Re: Rear long arms |
Yea I was thinking that |
|
| Author: | JeepMonkey190 [ Sat Jun 28, 2014 1:50 am ] |
| Post subject: | Re: Rear long arms |
I had the same thought of using some longer arms but the problem is if you do it, when it flexes the axle it will end up hitting the back of the fender before max flex therefore limiting your flex |
|
| Author: | silverkk [ Sun Jun 29, 2014 9:22 am ] |
| Post subject: | Re: Rear long arms |
But when I look at the rear it seems the wheel is closer to the front then the rear it's not centered it bothers me a little I wouldn't have. A problem getting a longer drive shaft made if i find/ make long arms |
|
| Author: | tommudd [ Sun Jun 29, 2014 9:50 am ] |
| Post subject: | Re: Rear long arms |
silverkk wrote: But when I look at the rear it seems the wheel is closer to the front then the rear it's not centered it bothers me a little I wouldn't have. A problem getting a longer drive shaft made if i find/ make long arms It appears that way but isn't really, when lifted it appears even more. But if you moved the rear diff back, when you flexed it out the tire would be too far back to go up into the wheelwell. There are other things to worry about For the amount of lift you can do etc not worth it |
|
| Author: | silverkk [ Mon Jun 30, 2014 12:34 am ] |
| Post subject: | Re: Rear long arms |
tommudd wrote: silverkk wrote: But when I look at the rear it seems the wheel is closer to the front then the rear it's not centered it bothers me a little I wouldn't have. A problem getting a longer drive shaft made if i find/ make long arms It appears that way but isn't really, when lifted it appears even more. But if you moved the rear diff back, when you flexed it out the tire would be too far back to go up into the wheelwell. There are other things to worry about For the amount of lift you can do etc not worth it |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|