LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Rear Iso's not working out, help please
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=79797		 Page 1 of 1
Author:  sil10kk [ Tue Aug 05, 2014 11:13 pm ]
Post subject:  Rear Iso's not working out, help please
So I already have the TM Econo lift installed for the 3.5" lift. I'm trying to install one rear ISO on the driver side to level her out. Issue: I must be missing how this is supposed to work, pic below shows the stock ISO on top of the new one (ordered from JBA) which is the only way the spring will seat correctly. However, as u can see in the pic it doesn't sit flush on the new ISO, and if installed as seen in the pic it's at 1" instead of .5". Anyone have some advice? Greatly appreciate the help, thx

Image
Author:  JeepMorrison [ Tue Aug 05, 2014 11:54 pm ]
Post subject:  Re: Rear Iso's not working out, help please
We always add top isolators, not bottom

Sent with the power of children's screams!!!
Author:  tommudd [ Wed Aug 06, 2014 12:21 am ]
Post subject:  Re: Rear Iso's not working out, help please
You have a KJ lower on there, plus like mentioned you add to the top, not bottom
Author:  sil10kk [ Wed Aug 06, 2014 12:26 am ]
Post subject:  Re: Rear Iso's not working out, help please
Ya I've read that some add them to the bottom and some to the top. I checked both and the situations the same either way I go (as far as I can tell). I'm thinkin I'm blind and missing something or these Iso's aren't gonna work. I'm hoping I'm just missing something
Author:  sil10kk [ Wed Aug 06, 2014 12:30 am ]
Post subject:  Re: Rear Iso's not working out, help please
Dang it, I'll have to check my receipt to see if I ordered wrong or if it shipped wrong. Thanks for the help, since I have more than one saying top then I'll go with that when I get the correct ones. Much appreciated!
Author:  tommudd [ Wed Aug 06, 2014 7:42 am ]
Post subject:  Re: Rear Iso's not working out, help please
You can add up to two extra on the top,
If you have the TM Econo lift you shouldn't need to add any though
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/