Made a thread to ensure I captured as much as attention as possible since it really hasn't been talked about or discussed.

I'm OCD, and my engine bay is filthy..can't stand it, it's driving me crazy. Does any recommend an Engine Bay degreaser that hopefully doesn't require me having to tape off or bag all electrical components? (Not enough patience for that) I don't care about price either, open to anything.

Thanks.

_________________
2011 Brilliant Black KK Sport - 3" OME/Bilstein & JBA UCA's, 245/75r16's & other goodies

I wanted to clean my engine also with degreaser and was talking with my dad about it and he said he once used degreaser and all the gaskets in his engine started to leak. Granted he did this years ago when he was in his 20s.

_________________
2010 KK Liberty Renegade
Mods:
2 Hella 500 watt lights on front bumper
OME 2.5in lift
245/75r16 General Grabber at2
Cobra 75 WX ST
3ft firestik

I'd be curious as to what others suggest. For now I've just been using rags and paper towels along with water or interior spray (that you use for dashboards, etc.).
Every KK owner knows our engine bay gets so dirty and dust, if you don't know, better open up your hood and see for yourself!

_________________
2008 Black Jeep Liberty Sport
4.7L throttle body
Old Man Emu lift
Sky Slider
Hypertech Max Energy
K&N CAI
Gibson stainless steel exhaust
Blacked out
ScanGauge2
BFG All Terrrain 225/75/16
JBA upper control arms

Simple Green works well , have used it on several different engines over the years with no issues. Have always hosed my engines off and kept them clean

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I'll try it out. Do you bag up all of your electrical components when hosing it off or no?

_________________
2011 Brilliant Black KK Sport - 3" OME/Bilstein & JBA UCA's, 245/75r16's & other goodies

No never bag anything, there are areas that I don't spray directly with the pressure washer but other than that just go for it

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited