| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Tom Mudd Lift http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=80346 |
Page 1 of 1 |
| Author: | oktane17 [ Sun Oct 05, 2014 9:03 pm ] |
| Post subject: | Tom Mudd Lift |
Hey everyone! SO i have a 2010 liberty and i have finally decided to beef it up. Ordered ATH bumper, and will be ordering a tomm mudd lift kit. for the money i hear its the best kit i can get. My question is simple; I plan on having my jeep another few years or so, and i just want to make sure its going to last and not ruin the jeep.jeep had 70k on it now.and its basically for trailblazing not heavy off roading. Feedback would be great thanks! |
|
| Author: | JeepMorrison [ Sun Oct 05, 2014 10:22 pm ] |
| Post subject: | Re: Tom Mudd Lift |
Its gonna last. I have pretty much same thing but a bit higher. I prefer it over OME. Sent with the power of children's screams!!! |
|
| Author: | At The Helm [ Mon Oct 06, 2014 2:00 am ] |
| Post subject: | Re: Tom Mudd Lift |
Don't forget the bumpstops... Teraflex liberty front bumpstops (same kk/kj) Hockey pucks or JBA rear (2 pucks or cut JBA's to 2") |
|
| Author: | tommudd [ Mon Oct 06, 2014 1:39 pm ] |
| Post subject: | Re: Tom Mudd Lift |
Front springs are Ironman , I tested the first Ironman full spring setup that came over and its now on another KJ and has a bunch of miles on it . Its still going great, rear springs are JBAs and I have personally ran them over 65,000 with no issues so far and others may have even more. That kit came together due to everyone wanting a full kit that worked well, rode good and would last. So its an overall great setup if you're wanting a good ride, good handling, and something that will last . Only has my name on it, so don't make anything from it, just providing information for you |
|
| Author: | Stang977 [ Mon Oct 06, 2014 8:15 pm ] |
| Post subject: | Re: Tom Mudd Lift |
Rides great. Love it |
|
| Author: | JeepMonkey190 [ Wed Oct 15, 2014 1:25 am ] |
| Post subject: | Re: Tom Mudd Lift |
Atthehelm wrote: Don't forget the bumpstops... Teraflex liberty front bumpstops (same kk/kj) Hockey pucks or JBA rear (2 pucks or cut JBA's to 2") I did not use new bumpstops, mathematically and proof (I have maxed out on one side while fully dropping the other side) with no issue of rubbing in the rear. but definitely get the fronts have come in handy |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|