| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 2012 KK Power Distribution Panel Design http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=80428 |
Page 1 of 1 |
| Author: | Oban [ Fri Oct 17, 2014 5:03 pm ] |
| Post subject: | 2012 KK Power Distribution Panel Design |
Good afternoon, I am getting ready to install some additional LED off road lights on my 2012 KK. I installed some additional 12V auxiliary outlets a while ago and used fairly simple wiring. As i am now adding more electrical consumers i figured i wire it all a little more professional. The following link is a diagram i made. The panel will be based on a Bussmann fuse and relay distribution panel that others have used here before on LOST. https://docs.google.com/file/d/0B-ETKLb8yIJWVk1jV1p3VVZzT0tLSFcyTWFZRUl6ckRfdGNn/edit?usp=docslist_api I'd like you to take a look and let me know if i missed anything, have some significant design issues, or could improve some things. Thanks in advance for feedback! EDIT: What i am looking for is literally whether this will work or not. The light bar should dim when the low beams are on. Also, i tried via the design to isolate the dimmer when not in use. |
|
| Author: | PALiftedKK [ Thu Dec 04, 2014 12:39 pm ] |
| Post subject: | Re: 2012 KK Power Distribution Panel Design |
Yes, your diagram will work out, although its probably installed already! the fuses on the neutral rail are over kill. their only needed for the hot rail. if a neutral rail fuse blows your going to be pulling your hair out trying to figure out which fuse blew. make sure you have 2 diodes on the pwm dimmer to prevent back flow voltage. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|