| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Need some help with replacing the horns http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=80478 |
Page 1 of 1 |
| Author: | CollinKK [ Fri Oct 24, 2014 8:16 am ] |
| Post subject: | Need some help with replacing the horns |
Hey everyone, Recently took the jeep through quite the puddle, and noticed my horns sounded like a clown car all of the sudden. I have replacements, but they are aftermarket. Does anyone have any info or a part number for the stock horns so I can do some digging? Or maybe someone even knows already if I need to use the included relay, and follow their wiring diagram (which doesn't look like it will fire one horn at a time) or just switch them as if they were stock. Wasn't looking for anything crazy, just a replacement so I grabbed Hella dual tone TE16 horns. |
|
| Author: | NAMoulton1 [ Fri Oct 24, 2014 9:31 am ] |
| Post subject: | Re: Need some help with replacing the horns |
This happens often to me, after a few days the horns will dry out and return to the way they were before. Here's the basic stuff for the horns that mopar has on their site: http://www.mopar.com/jeep/liberty/2010/shop/317275/27/3140/ |
|
| Author: | CollinKK [ Mon Oct 27, 2014 12:25 pm ] |
| Post subject: | Re: Need some help with replacing the horns |
Well there sadly was no drying out these guys. When I pulled them out, I literally poured out quite a bit of water. Luckily the connections to the stock horns are factory spade connectors. It was literally a plug and play switch. So if anyone in the future is looking to replace their stock horn with something similar if not a bit louder. The model in my first post will work |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|