Will these fit a liberty?
How will they sit compared to stock?
2008 liberty sport


Sent from my iPhone using Tapatalk

Are they 17s off a 07-present JK? If so, they need adapters. KKs use a 5x4.5 lug pattern, JKs use a 5x5. If they're 16s off a TJ/LJ they will fit.

As for how they sit, I'm not exactly sure. They should be pretty flush with the flares. Tom would know better. Also might have some rubbing issues depending on the tire size if you aren't lifted.

_________________
2011 Deep Cherry Red KK - Skyslider - JBA/Bilstein Adjust-A-Strut set at 3.5" - OME 731 Rear Springs - Bilstein Rear Shocks - Al's A-arms - 245/75-16 Duratracs - Rock Liazard Super Sliders

Says they are 17" from a 2011.
Really cheap to.


Sent from my iPhone using Tapatalk

Tons of them out there at a cheap price since not many can use that size/ bolt pattern
Cheap doesn't always mean a good deal though

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

^^^^^^And add in the price of adapters to those wheels!

_________________
2003/3.7 SOLD

2007 Wrangler - traded

2010 Wrangler Rubicon

Is there a thread showing what rims will go on a 08liberty


Sent from my iPhone using Tapatalk

Off the top my head, not an all encompassing thread. But, as long as the rims are a 5x4.5 bolt pattern with center bore size of 71.5mm and you keep it 16" or higher you'll clear your lower ball joints on the knuckle. BUT you can get 15"s is you get a 15x7 with 3.75(or less) backspacing.

Ideally you're looking at at 16x7 with 4.5"-5" backspacing. Many run 16x8s due to lack of options in the 16x7 categories. Both you'll want to run 4.5"-5" backspacing.

_________________
Custom Bumper & Rock Rails-JBA 4.5" Lift-Custom 4.5" HD Springs-16x8 M13 Rims-265/75 Pro Comp MT2s-Yukon 4.56s-Front DTT-Rear OX Air Locker

Basically that. 16x7 seems to be more popular with steel wheels. It's hard to find those specs on alloys. If 7" wide, 4" of backspacing will put you even with the flare. 5.5" is stock.

16x8 can work, but you need to be careful with backspacing. 4.5" of backspacing will sit similar to a 7" wide with 4" of backspacing. It'll be even with the flare. Now if you want to run a 8" wide rim, you need to look at tires that are AT LEAST 245 wide. And 265 would be better.

All that said and done, most of these numbers are for lifted Libertys. If you want the wheel to stick out more, you need to lift otherwise you'll have some rubbing.

This is one of the only threads I know about with rim specs and pics:
viewtopic.php?f=104&t=45371

_________________
2011 Deep Cherry Red KK - Skyslider - JBA/Bilstein Adjust-A-Strut set at 3.5" - OME 731 Rear Springs - Bilstein Rear Shocks - Al's A-arms - 245/75-16 Duratracs - Rock Liazard Super Sliders