| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Spring/UCA Contact http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=82412 |
Page 1 of 1 |
| Author: | nFodzy [ Fri Jun 19, 2015 8:59 pm ] |
| Post subject: | Spring/UCA Contact |
I just had my JBA a arms installed yesterday, and after taking some pictures I had noticed some contact marks on my front springs when I had the stock a arms. Hopefully now that I have JBA's, the contact will disappear. Now for the mark it left on my springs, what should I put on it to prevent it from rusting and affecting the performance of the spring? 
|
|
| Author: | Stang977 [ Fri Jun 19, 2015 11:49 pm ] |
| Post subject: | Re: Spring/UCA Contact |
Neal, I'm lucky enough to have access to a rust encapsulator at work. I've heard people have used POR-15 with good success. http://www.por15.com |
|
| Author: | NAMoulton1 [ Sat Jun 20, 2015 4:12 pm ] |
| Post subject: | Re: Spring/UCA Contact |
$6 can of Rustoleum Hammered haha. |
|
| Author: | Bmxer524 [ Sat Jun 20, 2015 11:24 pm ] |
| Post subject: | Re: Spring/UCA Contact |
I'd just do a quick sand and spray em black. |
|
| Author: | At The Helm [ Sat Jun 20, 2015 11:28 pm ] |
| Post subject: | Re: Spring/UCA Contact |
Black nail polish? To avoid overspray/masking |
|
| Author: | nFodzy [ Wed Jun 24, 2015 3:34 pm ] |
| Post subject: | Re: Spring/UCA Contact |
Thanks everyone for the suggestions! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|