| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Uca spring contact, confused http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=82514 |
Page 1 of 1 |
| Author: | motoman250f [ Wed Jul 01, 2015 11:24 am ] |
| Post subject: | Uca spring contact, confused |
Searched but couldn't find anything on this so sorry if it's been covered before. Before the winter I lifted the Jeep with the tommudd econo lift from jba with Ironman coils, .5inch clevis space and jba uca's in the front and jba's in the rear. Didn't have any uca spring contact before (that I noticed) but now I do, anyone got any ideas why this would start after 8k miles? |
|
| Author: | tommudd [ Wed Jul 01, 2015 5:26 pm ] |
| Post subject: | Re: Uca spring contact, confused |
Checked alignment lately? |
|
| Author: | motoman250f [ Wed Jul 01, 2015 7:02 pm ] |
| Post subject: | Re: Uca spring contact, confused |
Last time was when I installed the lift, I'm finally swapping tires tomorrow and I'll get it aligned shortly after, it doesn't seem out of alignment though (not that I can be precise) anything else it could be in case that's not it? |
|
| Author: | motoman250f [ Mon Jul 20, 2015 1:15 pm ] |
| Post subject: | Re: Uca spring contact, confused |
Haven't put it through the ringer yet after the alignment a couple days ago so I don't know for sure but it seems to have been solved with the alignment, a moderator might want to delete this thread since it turned out to be such a simple issue |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|