| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Hose ID for heater core flush http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=87769 |
Page 1 of 1 |
| Author: | ender9994 [ Wed Jan 31, 2018 8:46 am ] |
| Post subject: | Hose ID for heater core flush |
Hello, I am going to flush out my heater core as soon as the weather warms up because my heat has been extremely weak lately. I am going to get some clear hose to make the job neater and was wondering what the I.D. should be for the new hose I am getting. Looked online, but seemed to be seeing multiple different answers. Thanks in advance. Doug |
|
| Author: | Scar0 [ Thu Feb 01, 2018 11:15 am ] |
| Post subject: | Re: Hose ID for heater core flush |
Not 100% sure as I have not done this. But others have mentioned using 5/8" water hose, clamps, and a drill pump to flush. |
|
| Author: | racer1 [ Sat Feb 03, 2018 7:05 pm ] |
| Post subject: | Re: Hose ID for heater core flush |
The Gates power flush tool or the OTC 6043 has all the adapters you need. Dave |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|