LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

KJ's in for repairs
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=93&t=36833		 Page 1 of 2
Author:  CD [ Thu Oct 16, 2008 10:22 pm ]
Post subject:  KJ's in for repairs
http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=36830

I will let you guy's know what's broken etc when I find out next week. It's a bit of a bummer as I was going add some of those prado packers to the front left (slight sag).
Author:  pipeliner [ Fri Oct 17, 2008 12:35 am ]
Post subject: 
Sounds like yours may be about to do what Team J.a.G's did at Cityview
Author:  CD [ Fri Oct 17, 2008 1:05 am ]
Post subject: 
pipeliner wrote:
Sounds like yours may be about to do what Team J.a.G's did at Cityview


I hope not, I've been quite worried about taking it off road since Gregs diff bit the dust. THis however will fix that and should be like new.
Author:  cmohr [ Fri Oct 17, 2008 1:09 am ]
Post subject: 
So what were you getting , a funny grinding noise or something????? How did you find out about it???, How many "A"s are there in Australian.??????
Author:  CD [ Fri Oct 17, 2008 1:25 am ]
Post subject: 
cmohr wrote:
So what were you getting , a funny grinding noise or something????? How did you find out about it???, How many "A"s are there in Australian.??????


If "A"'s mean booty holes then there are lots of them LOL

It's like a metal rattle, you only hear it when you slow down and get to about 10ks or so. It can be very loud (after driving at speed), but can be quite after a bit of stop and start. The other thing is it's not the same all the time but recently it's been getting louder and I've noticed a slight delay in initial acceleration from sitting still (small sounding clunk). You can rotate the 1/2 shaft quite a bit, move it forward and backward (in and out of the diff), you can also shake it from side to side.

Best way to describe the noise would be to say; get a thick bit of metal and hit it between two bits of metal (back and forward real fast, then slow it down real fast.... stop.................do it again.......stop..................do it again). I say thick metal as it's not a tinny sound but a deep sound and certainly not a grinding noise.

Lucky I've not lowered my transfer case, if I had it would not pass warranty.
Author:  cmohr [ Fri Oct 17, 2008 1:42 am ]
Post subject: 
Hmmm. Sounds farmiliar........ :cry:
Author:  CD [ Fri Oct 17, 2008 1:46 am ]
Post subject: 
cmohr wrote:
Hmmm. Sounds farmiliar........ :cry:


That dosent sound good cmohr, are you still under warranty?
Author:  cmohr [ Fri Oct 17, 2008 2:00 am ]
Post subject: 
:cry: :cry: :cry: :cry:
Author:  CD [ Fri Oct 17, 2008 2:08 am ]
Post subject: 
cmohr wrote:
:cry: :cry: :cry: :cry:


Oh.... sounds like you need to listen to Pipeliner and get down on one knee. I will help you mate, all you have to do is say forever :D
Author:  pipeliner [ Fri Oct 17, 2008 2:30 am ]
Post subject: 
There once was a young man from Lymne
Who married three wives at one time
When asked why, he said "One
Really isn't much fun:
And bigamy, sir, is a crime"!
Author:  stevemcc [ Fri Oct 17, 2008 5:41 am ]
Post subject: 
"Best way to describe the noise would be to say; get a thick bit of metal and hit it between two bits of metal (back and forward real fast, then slow it down real fast.... stop.................do it again.......stop..................do it again). I say thick metal as it's not a tinny sound but a deep sound and certainly not a grinding noise."

Now that has to be one of the best decriptions I've read in a long time :D But does not sound good..... :(

All I've got is a clunk when I go over speed bumps in Paddington :oops: Think I need a trip.....
Author:  mikey [ Fri Oct 17, 2008 5:12 pm ]
Post subject: 
[quote="
All I've got is a clunk when I go over speed bumps in Paddington :oops: Think I need a trip.....[/quote]


So Steven, are you in Paddo too, we should go wheeling there together sometime!! :lol: :lol:
Author:  KJ Ash [ Sun Oct 19, 2008 10:38 pm ]
Post subject: 
Paddo boy here too!
Author:  CD [ Tue Oct 21, 2008 12:26 am ]
Post subject:  UPDATE
So they have ordered a collapsible spacer and new bearings so far, not sure what else as I couldn't talk to the guy who looks after me. All to come from Germany :roll: , could be 2 weeks or more. He did tell me that I had water in the diff, lucky me.. he's still doing it on warranty.
Author:  pipeliner [ Tue Oct 21, 2008 12:38 am ]
Post subject:  Re: UPDATE
CD wrote:
He did tell me that I had water in the diff, .


which I would guess has probably been there since a certain outing in August 2007........................................... :oops: :lol: :oops: :lol:
Author:  CD [ Tue Oct 21, 2008 12:53 am ]
Post subject:  Re: UPDATE
pipeliner wrote:
CD wrote:
He did tell me that I had water in the diff, .


which I would guess has probably been there since a certain outing in August 2007........................................... :oops: :lol: :oops: :lol:


Hang on, it could the 30 to 50m down river crossing I did with Ed and his mates last year.
Author:  stevemcc [ Tue Oct 21, 2008 4:00 am ]
Post subject: 
sorry to hear about the water have you thought about extending the breathers? I've seen a few posts here saying its a good idea but from a quick investigation you need an arm the width of a pencil with a couple of extra wrists :shock: Anyone local had a go?
Author:  CD [ Tue Oct 21, 2008 7:47 am ]
Post subject: 
stevemcc wrote:
sorry to hear about the water have you thought about extending the breathers? I've seen a few posts here saying its a good idea but from a quick investigation you need an arm the width of a pencil with a couple of extra wrists :shock: Anyone local had a go?


Sounds like a good job for Lemohr :lol:

Don't be sorry Steve, it's not going to cost me anything... this time. I agree it's a good idea, and will probably give it more thought once I get the KJ back.

Ed was talking about doing it last year but not sure if he still intends on doing it or not, looks like a real pain in the booty job.
Author:  CD [ Mon Nov 03, 2008 5:07 pm ]
Post subject:  Update
So the KJ is still on the hoist at Jeep Chatswood, been up on it for over 2 weeks now. I've got to say I've wanted to go down there just to have a look at it LOL. So parts are still in transit :roll:
Author:  smorison [ Mon Nov 03, 2008 9:30 pm ]
Post subject: 
ah sucks mate..
hey we're probably going to the beach (stockton) on the 28th November, if you're cars back on the road by then want to get it sandy????
:)
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/