Thanks for the information
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| lift kits http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=93&t=38617 |
Page 1 of 1 |
| Author: | jenko [ Sat Dec 27, 2008 3:23 am ] |
| Post subject: | lift kits |
Doe's anyone know if there is going to be a 4 1/2 inch lift + coming to australia and if so, when. |
|
| Author: | Glend [ Sat Dec 27, 2008 4:51 am ] |
| Post subject: | Here's is one option |
Hi Jenko, Jeepin Al has a lift kit that would give you that rise (4" and 6" kits). The link is: http://jeepinbyal.com/cat-Lift_Kits-4.aspx and keep in mind that you might need to buy Als shaved CV axles as well to prevent destruction of the stock CVs. You could also give CRDSTU a ring in Brissy, his kits seem to be able to go near that height. Whether this would be street legal in Australia - I have no idea. In Jeepin By AL's case - you would probably have to import this yourself and then find someone willing to do the install. I have heard (via the forums) that the main chains (ie ARB, TJM) in NSW are refusing to do anything above 50mm. The NPOC (new National Compliance regs) are going to allow lifts to 50mm only, what sort of engineering certification will be required in all states for vehicles going above that height is unclear ( as is the issue of insurance coverage). IMHO I'd do a lot of research and get your state authority to state their position (in writing) , (and your insurance company) before sinking that sort of $ into a kit. |
|
| Author: | jenko [ Sat Dec 27, 2008 8:24 am ] |
| Post subject: | |
Thanks for the information
|
|
| Author: | CD [ Sun Dec 28, 2008 3:05 am ] |
| Post subject: | |
Jenko, my lift from STU and some original OME stuff from my 1st lift is now 4". Getting the lift enginerred wasn't the problem, it was the rims that casused me so much grief. |
|
| Author: | jenko [ Sun Dec 28, 2008 4:41 am ] |
| Post subject: | |
hi Chris, is that front and back. |
|
| Author: | tommudd [ Sun Dec 28, 2008 6:48 am ] |
| Post subject: | |
CD wrote: Jenko, my lift from STU and some original OME stuff from my 1st lift is now 4". Getting the lift enginerred wasn't the problem, it was the rims that casused me so much grief.
What are you using from your original OME lift and what from STU? Wish we could get those springs of his here a little cheaper, may have to bite the bullet so to speak and get all 4  Also have you done anything to your CVs ( any problems)
Thanks !!!! Tom |
|
| Author: | Fouros [ Sun Dec 28, 2008 6:54 pm ] |
| Post subject: | |
the original stuff will be the struts and shocks, the springs and top spacer front, and rear poly spacers will be from stu |
|
| Author: | tommudd [ Sun Dec 28, 2008 7:20 pm ] |
| Post subject: | |
Fouros wrote: the original stuff will be the struts and shocks, the springs and top spacer front, and rear poly spacers will be from stu
Thanks Fouros for the answer thats what I assumed but wanted to make sure
|
|
| Author: | Fouros [ Sun Dec 28, 2008 7:45 pm ] |
| Post subject: | |
no worries mate
|
|
| Author: | CD [ Tue Dec 30, 2008 4:51 am ] |
| Post subject: | |
tommudd wrote: CD wrote: Jenko, my lift from STU and some original OME stuff from my 1st lift is now 4". Getting the lift enginerred wasn't the problem, it was the rims that casused me so much grief. What are you using from your original OME lift and what from STU? Wish we could get those springs of his here a little cheaper, may have to bite the bullet so to speak and get all 4 Also have you done anything to your CVs ( any problems) Thanks !!!! Tom As Fros said, UPFRONT the OME (old man emu) front struts and coils (HD) + STU's top strut spacer, + a 5mm clevis & no bull bar = 4" REAR is all CRDSTU, coils (extra heavy duty) and shocks (extra long travel) = 4". No problem with the CV's as I've not cut the uni body to allow for extra down travel. I'd say that's where most of the people with poop CV's get there problems. I don't plan to cut the side wall either, but in saying that... yes my upper control arm does contact the body & coils at full flex. |
|
| Author: | CD [ Tue Dec 30, 2008 4:56 am ] |
| Post subject: | |
jenko wrote: hi Chris, is that front and back.
yes mate, however I've taken some of the weight out of the back now and the rear is a little higher. |
|
| Author: | jenko [ Tue Dec 30, 2008 7:39 am ] |
| Post subject: | |
thanks Chris im running about the same height as you i just need that little bit more |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|