skid plate question

ratmloud · **Posted:** Fri Aug 11, 2006 3:11 pm

Skid Plate-Transfer Case(2004-2006) (L82209455)

will this fit my 03 kj? its the only one listed?

ratmloud · **Posted:** Fri Aug 11, 2006 4:01 pm

anyone, anyone? bueller?

Waldn · **Posted:** Fri Aug 11, 2006 4:07 pm

I don't believe anything changed from 03 to 04
should fit like a glove

Jeepjeepster · **Posted:** Fri Aug 11, 2006 4:21 pm

The skid I have for my 04, one if the bolt holes does not even line up? You should be ok. :wink:

Waldn · **Posted:** Fri Aug 11, 2006 6:28 pm

Jeepjeepster wrote:

The skid I have for my 04, one if the bolt holes does not even line up? You should be ok. :wink:

Which hole? all mine lined up.

Jeepjeepster · **Posted:** Fri Aug 11, 2006 7:55 pm

I didnt even worry with drilling a new hole, it should be fine. Do you have a pic of yours waldn?

Waldn · **Posted:** Sat Aug 12, 2006 4:39 am

no pic but I'll take one, one of these days when its not raining.

Jeep Dawg · **Posted:** Sat Aug 12, 2006 7:43 am

Yea man it will fit.
I have a front skid on my 03 KJ. The skid came off of an 04.

You will not have any problem with it linning up.

Waldn · **Posted:** Sat Aug 12, 2006 6:30 pm

Jeepjeepster wrote:

I didnt even worry with drilling a new hole, it should be fine. Do you have a pic of yours waldn?

here's some pics I took today

Bullet · **Posted:** Sat Aug 12, 2006 6:49 pm

Cool, now I know what the bottom of a KJ looks like with skids....I was wondering :lol:

Jeepjeepster · **Posted:** Sat Aug 12, 2006 9:19 pm

Hmm, thats crazy waldn. Wonder why my cross member doesnt have that hole? Thanks for the pics though.

unixxx · **Posted:** Sat Aug 12, 2006 11:42 pm

Jeepjeepster, you could just drill and tap one. I did that for the radiator skid for my ARB because two of the holes were missing from the crossmember.

jpzkj · **Posted:** Sat Aug 12, 2006 11:45 pm

Bullet wrote:

Cool, now I know what the bottom of a KJ looks like with skids....I was wondering :lol:

You put your Frankenlift on (mostly by yourself)...time to go slide under Bullet and see whats down there !!

:wink:

Bullet · **Posted:** Sun Aug 13, 2006 11:00 am

jpzkj wrote:

Bullet wrote:

Cool, now I know what the bottom of a KJ looks like with skids....I was wondering :lol:

You put your Frankenlift on (mostly by yourself)...time to go slide under Bullet and see whats down there !!

:wink:

Very true, but I think I will take her to my dads....he has a hoist...much easier. I am going to use his shop when I put the skids on.

moose · **Posted:** Mon Aug 14, 2006 7:54 am

After having to drop my diff skid and pound it back flat at Camp Jeep, I'll probably be getting heavier skids. The OEM skids are like the OEM Rock Rails - they'll work, but they'll bend.... I guess the good news is that a 15mm and a 3# hammer will fix it.

Jeepjeepster · **Posted:** Mon Aug 14, 2006 10:52 am

Hmm, the front skid is usually the strongest one moose, but its the one that gets hit the most also. After you get a lift, it will be much better. :wink:

moose · **Posted:** Mon Aug 14, 2006 9:48 pm

Jeepjeepster wrote:

Hmm, the front skid is usually the strongest one moose, but its the one that gets hit the most also. After you get a lift, it will be much better. :wink:

The front is still OK, but the diff skid got knocked up into the diff. Made a noise so bad I thought I'd broken the diff! :shock:

15-20 hits with the hammer, and she was good for another run in the rock garden...

mvef · **Posted:** Sun Aug 20, 2006 1:53 am

Is it going to fit in a 02 Liberty?

skid plate question

Who is online