It is currently Mon Nov 02, 2026 6:36 pm

View unanswered posts | View active topics


Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Burchie
 Post subject: relay
PostPosted: Mon Dec 31, 2007 8:17 pm 
Offline
Forum Admin
Forum Admin

Joined: Fri Jul 08, 2005 8:23 pm
Posts: 2776
Location: The call is coming from inside the house
Can someone find me a good diagram for wiring a 4 pole relay? I thought there was on on here.....

Thanks. Great board. Lots of info.

_________________
- Burchie
Top
 Profile  
 
corwyyn
 Post subject:
PostPosted: Mon Dec 31, 2007 8:31 pm 
Offline
Master of the Blender
User avatar

Joined: Thu Jul 07, 2005 4:21 pm
Posts: 2804
Location: Margaritaville
Here's one I did for someone wiring some driving lights:
Image

Just replace the lights with whatever your actual load is, and you can always bypass the switch if you don't want one in the circuit (the green wire would connect directly to terminal 86).

_________________
Kevin
AD5VG
Just another red Jeep in the world...
L.O.S.T. #KB051963
Top
 Profile  
 
tommudd
 Post subject:
PostPosted: Mon Dec 31, 2007 8:34 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Dang Kevin thats a great drawing, need to keep that handy!

Tom

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited
Top
 Profile  
 
corwyyn
 Post subject:
PostPosted: Mon Dec 31, 2007 8:41 pm 
Offline
Master of the Blender
User avatar

Joined: Thu Jul 07, 2005 4:21 pm
Posts: 2804
Location: Margaritaville
Just took the black and white one off the Hella website and added color coding, nothing fancy... :wink:

_________________
Kevin
AD5VG
Just another red Jeep in the world...
L.O.S.T. #KB051963
Top
 Profile  
 
myjeepwalks
 Post subject:
PostPosted: Mon Dec 31, 2007 8:57 pm 
Offline
LOST Junkie

Joined: Sun Jul 24, 2005 4:50 pm
Posts: 760
Location: nj
this is a good site i always find helpful.

http://www.the12volt.com/

_________________
02' Sport- SOLD

07' Dodge Ram Quad Cab 1500 4x4
Yeah it's got a hemi!
Top
 Profile  
 
Burchie
 Post subject:
PostPosted: Mon Dec 31, 2007 9:08 pm 
Offline
Forum Admin
Forum Admin

Joined: Fri Jul 08, 2005 8:23 pm
Posts: 2776
Location: The call is coming from inside the house
corwyyn wrote:
Image


So.... But..... OK.

A 2 pole switch. No light, nothing. Just a small duck bill switch. One to 86, and the other to power with about a 3A fuse?.

_________________
- Burchie
Top
 Profile  
 
Burchie
 Post subject:
PostPosted: Mon Dec 31, 2007 9:15 pm 
Offline
Forum Admin
Forum Admin

Joined: Fri Jul 08, 2005 8:23 pm
Posts: 2776
Location: The call is coming from inside the house
Like this..... No?

Image

_________________
- Burchie
Top
 Profile  
 
myjeepwalks
 Post subject:
PostPosted: Mon Dec 31, 2007 10:24 pm 
Offline
LOST Junkie

Joined: Sun Jul 24, 2005 4:50 pm
Posts: 760
Location: nj
looks good to me but if that's a lighted switch you need a ground coming off it.

_________________
02' Sport- SOLD

07' Dodge Ram Quad Cab 1500 4x4
Yeah it's got a hemi!
Top
 Profile  
 
Burchie
 Post subject:
PostPosted: Tue Jan 01, 2008 12:14 am 
Offline
Forum Admin
Forum Admin

Joined: Fri Jul 08, 2005 8:23 pm
Posts: 2776
Location: The call is coming from inside the house
myjeepwalks wrote:
looks good to me but if that's a lighted switch you need a ground coming off it.


Nope... No light.

I'm installing rock lights under the jeep.

_________________
- Burchie
Top
 Profile  
 
corwyyn
 Post subject:
PostPosted: Tue Jan 01, 2008 5:02 am 
Offline
Master of the Blender
User avatar

Joined: Thu Jul 07, 2005 4:21 pm
Posts: 2804
Location: Margaritaville
Burchie wrote:
myjeepwalks wrote:
looks good to me but if that's a lighted switch you need a ground coming off it.


Nope... No light.

I'm installing rock lights under the jeep.

Yeah thats pretty much it. You could use a lighted switch without the ground, it would still work but the light wouldn't come on. For clarity I took that middle connector out in this one:
Image
The 3A fuse in the sense wire is probably overkill, but it won't hurt anything to have it there. Be sure to post up some pics of the lights after you get them installed :D

_________________
Kevin
AD5VG
Just another red Jeep in the world...
L.O.S.T. #KB051963
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » KJ/KK/KL Liberty/Cherokee Discussion Areas » General Discussions

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management