frankenlift uneven in the rear

gsrtroy · **Posted:** Tue Jun 16, 2009 6:26 pm

I just got my frankenlift on friday and i was measuring ride height and the passenger rear side was about a 1/2" higher than the other. the front struts were even. has anyone else had this problem, and will it eventually settle even?[/list]

KJ 119 · **Posted:** Tue Jun 16, 2009 8:14 pm

My passenger side rear is a 1/2 inch higher,but I assumed it was because of the rear battery on driver side.
Mabe not.

Rudy · **Posted:** Tue Jun 16, 2009 9:24 pm

I hope it will settle even, I'm getting my frankie tomorrow.

Drassis · **Joined:** Tue Sep 23, 2008 7:31 pm **Posts:** 182

mine came out even no problem like that

Rudy · **Posted:** Thu Jun 18, 2009 10:36 am

gsrtroy wrote:

I just got my frankenlift on friday and i was measuring ride height and the passenger rear side was about a 1/2" higher than the other. the front struts were even. has anyone else had this problem, and will it eventually settle even?[/list]

Got my Frankie and it's even all around. Did you make sure that you were parked on level ground?

gsrtroy · **Posted:** Thu Jun 18, 2009 4:35 pm

well i checked it in our shop on perfect ground and the driver's front an rear are of by about 1/2" so im hoping it will settle even, i have nothing in the jeep that could cause it to do this.

Cobalt-60 · **Posted:** Thu Jun 18, 2009 4:52 pm

gsrtroy wrote:

well i checked it in our shop on perfect ground and the driver's front an rear are of by about 1/2" so im hoping it will settle even, i have nothing in the jeep that could cause it to do this.

See what happens when it settles a little bit. Drive over some speed-bumps.

I seem to remember that there were a pair of yellow OME "trim packers" in the box with my OME948 HD rear springs, but I can't seem to find them now...

See:

http://www.oldmanemu.com/store.html?pid=46

Could not tell you which one is the proper size though...

I am NOT saying that these are the proper size, but they looked like these:

http://www.quadratec.com/products/16090_601.htm

gsrtroy · **Posted:** Thu Jun 18, 2009 5:00 pm

nope no trim packers came with the springs. im gonna let it sit for a while, its just weird that the drivers front and rear are of by 1/2". wouldn't this mean my jeep has more weight on the drivers side. i have no extra weight added to the jeep besides the subwoofer but i checked it with that out and it didn't change.

LIV42DY · **Posted:** Sat Jun 20, 2009 10:19 pm

did you check the rear springs before you installed them to make sure they were both HD's?

sprsonic · **Posted:** Sun Jun 21, 2009 12:22 am

my franky was about a half inch higher in the front for about a year, then settled to just under a quarter inch higher.

frankenlift uneven in the rear

Who is online