Any one near Muncie Indiana???

Diggerfreek · **Posted:** Tue Nov 10, 2009 11:40 pm

I know we have a few of you out that way. I only ask because I am looking for someone that would not mind having their KK measured and test fitted for a product. I would really help out for the rest of the KK as we don't have a strong aftermarket yet. I might even be able to provide some compensation to :wink:

PM or post up if you want to know more.....

Jeepin_it_real · **Posted:** Wed Nov 11, 2009 12:00 am

is NY close enough, cause i'll test it out haha

Diggerfreek · **Posted:** Wed Nov 11, 2009 12:10 am

Jeepin_it_real wrote:

is NY close enough, cause i'll test it out haha

Not quite, unless you want drive :twisted:

I'm basically looking for one one that will allow a second party fondle their jeep with a tape measure, and then allow a test fit of said product. Best part is their isn't any heavy disablement of the said KK needed

Jeepin_it_real · **Posted:** Wed Nov 11, 2009 12:14 am

may i as what they are doing, cause if its something i want the drive might be worth it... p.s. is it free?

Diggerfreek · **Posted:** Wed Nov 11, 2009 12:26 am

Jeepin_it_real wrote:

may i as what they are doing, cause if its something i want the drive might be worth it... p.s. is it free?

Still in the planing stages.... but if we can get enough pre orders when the time is right, we could make something happen. Note, this is NOT for a lift/skid plates/ rock rails/roof rails.....

That is all I'm going to say :twisted:

Jeepin_it_real · **Posted:** Wed Nov 11, 2009 12:28 am

so i'm volunteering for something to be done to my KK that i don't know about? ha ha

Diggerfreek · **Posted:** Wed Nov 11, 2009 12:34 am

Yep

It always goes that way :lol:

Jeepin_it_real · **Posted:** Wed Nov 11, 2009 12:44 am

is it worth my drive ( aka frustration and gas money/ would i personally want this thing)

wolverine · **Posted:** Wed Nov 11, 2009 12:45 pm

Being in southeast michigan, I am a little less than 4 hours away and would gladly do the drive.
Any specific equipment the KK can/cannot have for this test?

tools113 · **Posted:** Wed Nov 11, 2009 4:56 pm

I am going to be in the area on Monday afternoon

Diggerfreek · **Posted:** Wed Nov 11, 2009 5:03 pm

Thanks tools, But I think we found our person :wink:

I'll let you know if they don't work out.

tools113 · **Posted:** Wed Nov 11, 2009 5:13 pm

Ok, thanks

rav · **Posted:** Wed Nov 11, 2009 6:10 pm

Is it a front bumper??? :?:

Diggerfreek · **Posted:** Wed Nov 11, 2009 6:24 pm

rav wrote:

Is it a front bumper??? :?:

I wish

But that's on next's months agenda :wink:

hrogi · **Posted:** Thu Nov 12, 2009 7:32 pm

Well if you ever get a Vendor in California San jose.
let me know.

I have a nice Stock limted that can be looked at.....

Diggerfreek · **Posted:** Thu Nov 12, 2009 8:10 pm

hrogi wrote:

Well if you ever get a Vendor in California San jose.
let me know.

I have a nice Stock limted that can be looked at.....

Shall do

I may need you to help me out with SUPER SECRET project #2 :twisted:

Now, I'm off to ponder about project #3, #4, & #5 :roll:

wingnuts · **Posted:** Fri Nov 13, 2009 7:47 pm

Seriously there arn't any companies in the Chicago area that you may need to talk to????

hrogi · **Posted:** Fri Nov 13, 2009 7:53 pm

Sound good... I am here to help.

Even if i do not get to keep it.. i am not greedy..

Diggerfreek · **Posted:** Fri Nov 13, 2009 9:03 pm

Give me more time, and I'm sure I can think of more stuff that we need for out KK's that have people on those areas.... Any one now if a plexi glass fabricator?

RPM007 · **Posted:** Fri Nov 13, 2009 10:12 pm

I would be willing to be a guinea pig in the future if you ever need a KK with a SkySlider. I am only about 4 hours out.

Any one near Muncie Indiana???

Who is online