THE OHIO CHAT ROOM!!!

501 · **Posted:** Fri Apr 22, 2011 1:56 am

Can't wait to see the new place next month, hopefully you'll be up to visitors!

tommudd · **Posted:** Fri Apr 22, 2011 4:50 am

The Title Company and Loan Company both fell off for about a week and my paperwork laiyed around with nothing done, so kind of a week or two behind now.
Will have to see if I can get in, everything settled and ready for the "LOST CREW"
It will happen jjst maybe a little later.

Oh the current owners said it was cool to have a small bonfire in the evenings, neighbor down the road is cool if you have TOO MANY guests they can park in his yard, said he hoped I don't mind ATVs going by on the road since everyone rides down to the park. Sounds pretty good so far. Now to get an ATV and get license plates on it.

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

tommudd wrote:

yodejt02 wrote:

congrats!!!! :BANANA:

A bar in the garage.....maybe

Urinals, and a commercial ice machine are a must

Bar, well plenty of cabinets and ask Buggin' I always HAD some "top shelf" plus got a new fridge, so....
Urinals...........have you ever seen a funnel with , well never mind :oops:

Commercial ice machine, man how many of those fruity drinks we gonna make anyways ? :ROTFL:

I have the blender as well, not gas powered but..........

I fixed it for ya :ROTFL:

Oh man I DID forget to tell ya the last time I played barmaid, time to stock up :wink:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

When I got home tonight after Momma drug me out Easter shoppin (didn't find any Scotch for my basket :banghead:

) I was soooooooooo pleased to find boxes on the front porch

One from a very cool dude here on LOST that gave me a swinging deal and one from JBA :pepper:

Still no springs though :banghead:

I have an email into Marlin to find out where on earth they are, I should of had them by now :evil:

501 · **Posted:** Fri Apr 22, 2011 8:54 pm

Tom,

I'll have to pick up a bottle of Woodfords or Makers Mark when I come over to 'Break' the new place in right!

KJWildman · **Posted:** Fri Apr 22, 2011 10:10 pm

Catching up again!
Congratulations Tom!!! I know you've been looking and looking forward to this for quite a while!

Bonfire's :CAMPING:

, good friends :BANANA:

a good bottle :5SHOTS:

and some bench wheelin' :JEEPIN:

! Sounds like a good summer at Tom's coming up!!
With any luck maybe I can stop by if I'm not workin'! :roll:

Hart, good to hear you are enjoying your new job. Even if only for a few minutes on my way out the door to work, it was good to talk to ya the other day!! :BANANA:

Glad to hear your KJ is finally growing up! :pepper:

It's been a slow week for me for a change. Only worked 68 hours/5 days this week AND I have tonight off!! :pepper:

I'm actually going to be able to get out and in the garage tomorrow. :JEEPIN:

Going to try and get the engine all assembled with pan on and new intake and all ready to go back in. Still have 4 new holes to locate and drill in the engine compartment ( for my new top secret mod! :twisted:

) before the engine actually goes in.

They've been interviewing at work for a new 3rd shift maintenance tech, so with a little luck maybe I can get off these 12-14 hour days and get back to the IMPORTANT things in life. :JEEPIN:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Awesome Larry :pepper:

It will be good to have ya around again :jester:

I would offer ya some help tomorrow but I have a TON of stuff to get done tomorrow before family makes it's way down here on Sunday. But I do have to make my way out to Tom's tomorrow to pick up some shocks that I can rob the sleeves from them for my new Bilsteins. I will call ya before I go and hope to catch ya so I can stop on by to jaw with ya for a few, oh and also drop off that pump :JEEPIN:

KJWildman · **Posted:** Fri Apr 22, 2011 10:27 pm

Cool! Most of what I want to accomplish tomorrow is just engine assembly stuff. Who knows, depending on what time you go, maybe I can roll the door down and hitch a ride. It would be good to see Tom again too.
Pump .....
Hey ... anybody need a power steering pump from an '02? Dang, that's something else I need to do out there. Make a list of parts not going back on and get them up for sale!!

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Toms headed out tomorrow, he wont be home. I am just grabbin them and going but you would be more than welcome to go if ya want to ride along in a Jeep ya haven't been in for almost forever :ROTFL:

I might even let ya drive it so ya can get that fever back again :ROTFL:

tommudd · **Posted:** Fri Apr 22, 2011 10:41 pm

He needs to get the Jeep fever back again! :ROTFL:

Unless you have it inside its suppose to rain, rain the next 4 or 5 days at least!
I think you're going to have to build a garage over that thing Larry so you can finally get it done!

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

accidently found a new potion tonight since I didn't feel like going to Scotland for a decent scotch :jester:

Travis Hasse's applie pie liqueur, a quality blend of apple, cinnamon and natural grain spirits :pepper:

very yummy to da tummy :goink:

tommudd · **Posted:** Sat Apr 23, 2011 12:53 am

mmmmmmmmmmmmmm :5SHOTS:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

tommudd wrote:

mmmmmmmmmmmmmm :5SHOTS:

Indeed, I'll have to bring ya an untapped bottle :jester:

teckman02 · **Posted:** Sat Apr 23, 2011 4:04 pm

well this week i have been dealing with a flooded basement from all the rain that we got on tuesday. i wish that i would get a call back soon to know how it is all going to cost me and how much i am going to get back for repairs and and damages.

Marlon_JBT · **Posted:** Sat Apr 23, 2011 7:50 pm

Surely you guys like blue Libbys, right? Lots and lots of pictures of them!

I've been growing tired, absolutely tired of the non-palm friendly shift knob for MONTHS now, so I got rid of the POS and installed this new shift knob from a 2011 Durango.

(IF I had my way I'd install the ENTIRE shift assembly from a KJ but I don't think that is possible....)

Also, washed it today. :lol:

This is the 2nd shift knob mod I've tried on a Liberty except this one was actually ALMOST successful. Because of the differences of how the knob snaps in, it...well.... isn't. As long as nobody pulls up on it, it should be fine. :twisted:

teckman02 · **Posted:** Sat Apr 23, 2011 9:13 pm

Marlon_JBT wrote:

Surely you guys like blue Libbys, right? Lots and lots of pictures of them!

I've been growing tired, absolutely tired of the non-palm friendly shift knob for MONTHS now, so I got rid of the POS and installed this new shift knob from a 2011 Durango.

(IF I had my way I'd install the ENTIRE shift assembly from a KJ but I don't think that is possible....)

Also, washed it today. :lol:

This is the 2nd shift knob mod I've tried on a Liberty except this one was actually ALMOST successful. Because of the differences of how the knob snaps in, it...well.... isn't. As long as nobody pulls up on it, it should be fine. :twisted:

i dont think that anyone around here wants to see someone pull your knob

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

I have tried to remove just my shifter knob on my 07 and it's not possable do to the wires for the od. I think once the entire shifter assembly is removed including the wiring where ever the dang connector is then the knob will come off. I just want to cover it with leather is all :roll:

Spent the day cleaning the house for the family the show up tomorrow just to mess it all up, but it will be fun, good food, family and an Easter Egg hunt :pepper:

I always find the most eggs, maybe I shouldn't hide them this year :ROTFL:

Also went over and jawed with Larry for a bit, was great to see him again and not have a 30 second phone conversation because he had to run off to work :5SHOTS:

Got home and turned around to go to the grocery store to finish buying odds and ends for a wonderfull dinner we're going to have tomorrow :pepper:

Cut the sleeves out of some old KJ shocks, that I picked up from Tom's, just to find out I either have to grind down the sleeve to 5/8" od or go to the hardware store and buy some pipe that would work if they have such an animal. Think I will grind down the factory sleeves so they will fit the bolts properly.
Now it's me time, hockey night in Canada and the playoff's :5SHOTS:

Marlon_JBT · **Posted:** Sat Apr 23, 2011 10:44 pm

Yeeeeeeeeeeeeeaaaaaahhhhh, I pulled off the knob on my '04 to see if a Sebring knob would fit (leather) even though there was no O/D button (I never used O/D lockout, but I had plans to relocate it anyway...) and just ripped the wires out.

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Marlon_JBT wrote:

Yeeeeeeeeeeeeeaaaaaahhhhh, I pulled off the knob on my '04 to see if a Sebring knob would fit (leather) even though there was no O/D button (I never used O/D lockout, but I had plans to relocate it anyway...) and just ripped the wires out.

Hope it works for ya, your rig is lookin good by the way.
I plan on covering mine when the weather stays warmer and I have the patience to sit and sew while cocked in a funky position :ROTFL:

Not to mention figuring out the pattern while the knob is attached is going to be a trick :twisted:

BugginKJ · **Joined:** Mon Jul 06, 2009 7:35 pm **Posts:** 4576

Well it would be there if ya ever do use it and plus the cool factor ya just can't forget :jester:

How about some hood louvers, rock rails or you could always slap on some stickers on the windows :ROTFL:

I am waiting to hear from a buddy of mine with a few connections in the Detroit Metro area, he knew an old timer that did custom hot rods for a living. I want louvers but I want real hood louvers, the punched in style just like the old rods, then a flat balck hood scheme of some sorts. I also like how ya did your hood, for a KK not bad :goink:

THE OHIO CHAT ROOM!!!

Who is online