Looking at getting a 2 1/2 full suspension lift from Rusty..is it a true 2 1/2 over stock ? Any feedback appreciated

Will not last but a few months under the weight of the CRD.Stock CRD front coils are 410lbs and rusty's coils are rated at about 300lbs,same as the stock gas KJ's front coils.

TJKJ is on point. Mine is not a CRD but......before I knew any better I bought it and it sagged over 1.5 inch in 9 months=wasted money!!!! and the ride was too soft. Also customer service from those guys sucks!!! I emailed them with my problems and they said they would do some checking an fix me up, whatever that meant.....Anyhow multiple emails later from me to them they said they were waiting on there "guy" to give them the measurements of stock suspension, I let them know what the measurements were but apparently i wasn't their "guy" so they didnt respond. So long story short the KJ RUSTY's lift is crap! and so is their customer service.
Sorry to be long winded just figured I'd share my experience. Cheers

_________________
2003 Sport
3.7 45rfe
LOKKA Rear locker
OME 927 NS131's
JBA top plates
JBA A-Arms
3 ring clevis
Terraflex bump stops
OME 948 extra iso N132L's
Hockey pucks
Optima Red Top
Cobra 19 4' Firefly on Tram Triple Mag Mount
MOABS W/ 245/75/16 E Duratracs
ASFIR ARMOR
Rock Lizard Super Skink's
Other Stuff................


Size 13 Carbon Foot Print

Anyone have recommendations ?

Its being installed this morning I guess I'm taling a chance. Tires rubbing bad and I need to get the extra height over the OME. I don't really do any off roading just some trails. I need to re coupe some of my money and sell the ome for 450 $

If you weren't going to listen, then why did you ask?

I think I'm getting crabby in my old age...

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings

OME Lift is nice and easy to install with a top plate and clevis spaced up front and 2 extra isolators in the rear and you will be set for 2.5" all day long and if done right last atleast 80K.

_________________
My CRD Build Thread
Soon to Come:more lights

Audioboy I have a top but don't know what or how to do a clevis lift and as far as the isolators in the back wouldn't the shocks be too short