What have you done to your KK lately

m80jeep · **Posted:** Fri May 23, 2014 9:56 pm

Thanks.Thinking about blacking out the headlight housing next.

LKWJeeper · **Posted:** Sat May 24, 2014 7:07 am

I've got a spare set if you want to do a trial run first.

Sent from my LG-D801 using Tapatalk

RLDStover · **Joined:** Sun May 04, 2014 5:24 pm **Posts:** 43

Hi haven't posted much, pulled the bumper myself with a lot help from God, jeepers, forum and installed tow hook mod, the one with the tow hook brackets welded to 6"receiver tubes, my brother in law did the welds I just cleaned, painted and put them in gonna try and post a photo if I can figure out how from a iPad. Before, During, After, sort of other parts not in yet and not sure of the paint job. Thanks for the clue on how to post photos JeepMonkey190

JeepMonkey190 · **Posted:** Sat May 24, 2014 1:08 pm

RLDStover wrote:

Hi haven't posted much, pulled the bumper myself with a lot help from God, jeepers, forum and installed tow hook mod, the one with the tow hook brackets welded to 6"receiver tubes, my brother in law did the welds I just cleaned, painted and put them in gonna try and post a photo if I can figure out how from a iPad.

Get the "Photo Bucket" app for your iPad then you can transfer the pics from your iPad to photo bucket then copy and paste the image link to the forum :mrgreen:

carlosburitica · **Joined:** Sat Jan 05, 2013 1:07 pm **Posts:** 309

RLDStover wrote:

Hi haven't posted much, pulled the bumper myself with a lot help from God, jeepers, forum and installed tow hook mod, the one with the tow hook brackets welded to 6"receiver tubes, my brother in law did the welds I just cleaned, painted and put them in gonna try and post a photo if I can figure out how from a iPad. Before, During, After, sort of other parts not in yet and not sure of the paint job. Thanks for the clue on how to post photos JeepMonkey190

like it....

wish i could have a green kk like that

RLDStover · **Joined:** Sun May 04, 2014 5:24 pm **Posts:** 43

carlosburitica wrote:

wish i could have a green kk like that

Thanks Rescue Green, lol, , it's a start nothing like some of what I've seen on the forum but Hoping have lots questions on what I'd like to do, went to Harbor Tools today gosh they ought to ban places like that and me but was able to get two receivers. Amongst other stuff but don't like the shackles that came with them so I'll keep looking until I either find another 3/4 shackle or a pair.

Does antibody know anything about Badland winches they have a 12000lb that will be 299 come the first week of June reg. 499. But I've not heard of them before and don't have anywhere to put it yet but ima thinking.

Ted15 · **Posted:** Sun May 25, 2014 10:44 pm

RLDStover wrote:

carlosburitica wrote:

wish i could have a green kk like that

Thanks Rescue Green, lol, , it's a start nothing like some of what I've seen on the forum but Hoping have lots questions on what I'd like to do, went to Harbor Tools today gosh they ought to ban places like that and me but was able to get two receivers. Amongst other stuff but don't like the shackles that came with them so I'll keep looking until I either find another 3/4 shackle or a pair.

Does antibody know anything about Badland winches they have a 12000lb that will be 299 come the first week of June reg. 499. But I've not heard of them before and don't have anywhere to put it yet but ima thinking.

Save your money for a proven one like mile marker or warn. I bought a smittybilt and it broke the first time I used it. Like the old saying goes, buy once cry once.

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

RLDStover wrote:

Hi haven't posted much, pulled the bumper myself with a lot help from God, jeepers, forum and installed tow hook mod, the one with the tow hook brackets welded to 6"receiver tubes, my brother in law did the welds I just cleaned, painted and put them in gonna try and post a photo if I can figure out how from a iPad. Before, During, After, sort of other parts not in yet and not sure of the paint job. Thanks for the clue on how to post photos JeepMonkey190

do you have pics to how they were made look clean

jjohnson1892 · **Posted:** Mon May 26, 2014 10:05 pm

Man, it’s been a while since I posted..

Going back a ways, I used it to get to some awesome fishing spots. Got some good flexing in (no pics though)

Then loaded it up after graduation to move to NJ for a few months. All loaded up with my junk and a tank of gas, the rear was sagging over an inch :ROTFL:

Still unpacking my KK but start commuting to work tomorrow. Hoping to do a few small mods in the future though, summer time = mod time

crippled · **Joined:** Sun Feb 24, 2013 11:20 pm **Posts:** 284

Quadratec Black MOAB replicas. Got them on this weekend!

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

Quadratec Black MOAB replicas. Got them on this weekend![/quote]

:shock:

JeepMorrison · **Joined:** Thu Jul 16, 2009 11:34 am **Posts:** 1236

crippled wrote:

Quadratec Black MOAB replicas. Got them on this weekend!

I can't see them!!! Moabs are sexy

Sent with the power of children's screams!!!

crippled · **Joined:** Sun Feb 24, 2013 11:20 pm **Posts:** 284

can you not see the pic? I can try to host it else where

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

Came across this:

http://www.cbioffroadfab.com/photo-gallery/jeep-gallery/custom-fold-down-tire-carrier

JeepMonkey190 · **Posted:** Tue May 27, 2014 2:01 am

nFodzy wrote:

Came across this:

http://www.cbioffroadfab.com/photo-gallery/jeep-gallery/custom-fold-down-tire-carrier

So I took a look at it and I like they said on their website I would ONLY use on highway because the problem I see with this is that it is on a single pole and even though it is probably strong enough to hold the weight of the tire it will move around while locked in the up position do to that it is on a bolt style hinge and movement equals noise like squeaking or tapping sounds during every bump on the road, plus unlike a regular tire swing when you need to open the back hatch or glass you can just open and close it with ease but with this type you have to lower the tire and then when your done you have to pick it back up which would be a pain. :2cents:

JeepMonkey190 · **Posted:** Tue May 27, 2014 2:01 am

Its done

here are some photos of the new product I just finished, let me know what you guys think :twisted:

Can you see it in this first photo? Its not painted yet but it will be within the next couple days.

Its a REAR DIFF SKID PLATE!!! :twisted:

If there is enough interest in them I will start producing them for those who would want to purchase one

More pics

silverkk · **Joined:** Mon Feb 04, 2013 12:27 pm **Posts:** 637

Jeep monkey nice job

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

finally installed these!

Surprisingly, these mini blindspot mirrors work wonders!

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

Working on mobile power bank:

Got a 120v-12v converter to power up 12v toys when it is plug in (camping) and also attached a 12v 1.5 amp battery charger to charger the battery while it is plug into 120v outlet

The power will will get power from the battery by default and automatically switch to 120v converter once plug in.

Those switches will control exterior and interior LED work lights and the battery charger.

nFodzy · **Joined:** Sun Oct 06, 2013 1:30 pm **Posts:** 389

Hey does anyone know the cheapest place to get the wiring harness for the mopar hitch?

What have you done to your KK lately

Who is online