Has anyone ever found a fix for interior rattling or ticking caused by speakers when listening to the radio?

_________________
2005 Jeep Liberty CRD Limited
-Timing belt
-Weeks 1 and 2 EGR delete kits

The dash tweeters are very low quality and are easily blown. It's easy to pop off the cover there, held on by a few metal clips 'pointing' downwards under the panel.

If it is your door speakers, same deal, take off the interior door panels (trickier - a few screws...maybe 3 or so plus disconnecting the door handle/latch mechanism), then pull towards you to remove the panel starting from the bottom working upwards. Then lift it off the section of the door where the window comes out. This is from memory, but it's fairly straightforward. To mount aftermarket speakers, you will need spacers to fit into the stock location (try amazon or crutchfield). You can also cut the mounting ring off of the stock speakers and mount your aftermarkets to them. Takes a bit more time, but it's free.

I bought an overstock set for cheap and put them in together with a new head unit. Sounds great.

EDIT: if you are asking how to stop the resulting vibes from loud music, you would have to install something like Dynamat or whatever the modern equivalent is.

_________________
03 KJ Sport - black
4xGuard engine skid
235/85/16 Hankook ATM
OME 927/Ironman, 1/4" plate, 3-ring clevis 21.5"
OME 948/OME + 2 Iso's Rear 22"
JBA UCAs
Bumper and winch
2x5 rockers/steps
Dynomax Ultra-Flo Welded
Custom pinstriping
Custom rear interior shelf
SS drop table
Soon:
Rear bumper
WRX seats
All the skids

Just looking to stop the rattling for now. But some day wouldn't mind swapping out the speakers for something better.

_________________
2005 Jeep Liberty CRD Limited
-Timing belt
-Weeks 1 and 2 EGR delete kits

Might as well swap the speakers out when you are in there. The A lost trim/grab handle needs to come off to get the dash panel off.

Sent from my Nexus 6 using Tapatalk