PaU-MWolverine wrote:
meh_kick wrote:
Note the basket sits between the rails, but I'm not sure how he's got the thing supported (if at all) from under the basket.


Paging
tommudd...
Please, sir, I'd like you to chime in on this!! Thanks!

Had to be in the main office today in Columbus and come home to find my KJs pictures all over the place!
So here you go.....You know my saying, (ITS NOT YOURS TILL YOU DRILL THAT FIRST HOLE IN IT) so I drilled a half inch hole through the side rails, right where there already is two small holes on either side, shoved some 1/2 inch all thread through the side rail, then heater hose on the all thread so no metal to metal contact, then through the other side, have nuts and washers on the inside and outside of the side rails to hold it in place. Works pretty good , now with me and 2 MTRs on Moabs up there, it did bow down some but other than that works great. Have two across by the way. Rack is held on with small u bolts. I do have another plan in the works which will keep it as low or maybe lower and stronger, although I think the rack bowed more than the all thread did.
RL does have a sweet rack and I keep looking at it, but I only have like 50/55 bucks total (basket and mounting it) in mine, so hard to change and spend the extra.
no one even asked about my homegrown wind deflector or where it came from, and no its not a road sign this time
Tom