How hard is it to retrofit the 05 trans skid on a 04? i've seen a write up somewhere, but i can't find it. i've installed the 3 other mopar skids this week but i don't like the open space around the trans.

_________________
N8
Lifetime member #NG050001
2004 Sport
Flame Red
cb, full armor
"If you're not living on the edge...You're taking up to much space!"

Easy. You need to drill 2 holes BUT 1 bolt lines up on the front and 1 on the back, so if you’re like me and this is temporary until I get get the cash for a all j's superskid it works no drilling required.

And I have brush it on some good rocks a time or 2.

_________________
2004 Silver Liberty Sport 4x4 (gone)
1996 Land Rover Disco I
L.O.S.T #000522 Life Time #JH053535

I did the same thing. Very easy.

BTW, I'd suggest that you don't try to use nutzerts (for the bolts in the rear). Just drill all the way through the crossmember and fasten the bolts with washers and nuts. Holds really well, and you won't have to fight with nutzerts.

_________________
09 Yellow JK Rubicon LOST #TY050608
TeraFlex 4" long arm lift, 35" BFG KO2s, Tatton driveshaft, Riddler diff covers, RIPP headers,
MBRP off road exhaust, Cobra C75WXST, Little Passengers 3rd row seat
Formerly: 02 White Ltd 4x4 with lots of stuff...
Pics: http://troysterr.com Links & Parts: http://youngs.org/kjparts

Got it on, thanks

_________________
N8
Lifetime member #NG050001
2004 Sport
Flame Red
cb, full armor
"If you're not living on the edge...You're taking up to much space!"

Troy did u see this? mabey why i overpaid.http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=2147

_________________
N8
Lifetime member #NG050001
2004 Sport
Flame Red
cb, full armor
"If you're not living on the edge...You're taking up to much space!"

Yeah, just saw it. See, if you'd just gone to my parts site and gotten the right part #...

Sorry to twist the knife.

yup

_________________
N8
Lifetime member #NG050001
2004 Sport
Flame Red
cb, full armor
"If you're not living on the edge...You're taking up to much space!"