_________________
2006 Liberty Renegade
OME, Rancho, RRO A arms, RRO roof rails w/ diy cross bars, Dual XHD7714 with Pyle speakers, drop in K&N air filter with home made CAI, 8k smittybilt winch , Sears Platinum P1, in cab winch control, 100w Optilux lights, 7" e-code Hella headlights,245/75-16C Duratracs. DIY rockrails, DIY rear double deck cargo rack.

I just got a email from Airlift that states the airbags in the 60844 and the 60744 are the exact same bag. The difference must be in hardware but what it is, I don't know.

_________________
2006 Liberty Renegade
OME, Rancho, RRO A arms, RRO roof rails w/ diy cross bars, Dual XHD7714 with Pyle speakers, drop in K&N air filter with home made CAI, 8k smittybilt winch , Sears Platinum P1, in cab winch control, 100w Optilux lights, 7" e-code Hella headlights,245/75-16C Duratracs. DIY rockrails, DIY rear double deck cargo rack.

If you haven't already, you might want to read this thread: viewtopic.php?f=3&t=61141&p=677778#p677778

Also, read this thread: viewtopic.php?f=1&t=35985&start=60

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.

Thanks for the links. I didn't see these.

_________________
2006 Liberty Renegade
OME, Rancho, RRO A arms, RRO roof rails w/ diy cross bars, Dual XHD7714 with Pyle speakers, drop in K&N air filter with home made CAI, 8k smittybilt winch , Sears Platinum P1, in cab winch control, 100w Optilux lights, 7" e-code Hella headlights,245/75-16C Duratracs. DIY rockrails, DIY rear double deck cargo rack.

No Problem!

_________________
2015 Ram Ecodiesel/Big Horn/4x4/Quad Cab
2016 Arctic Fox 22G/Onboard 2500 LP Cummins Onan Generator/160 Watt Solar Panel

I took the road less traveled. Now I'm LOST.

Hello candpliberty

curious if you still have the airlift system(60844) in your jeep? And are you still happy with it? I currently have the 2.5 jeepin by Al's lift, and figured I would need a little bit longer air bags because of that, rather than the recommended air bags.

_________________
2005 Jeep Liberty Limited CRD, JBA coilovers-4.5 Arms, 5xMoab's with 265-75-16 Mickey Thompson Baja ATZ, Safari snorkel, Suncoast T/C, GDE Hot tune, Mandrel bent CAC Tubes, EHM to airbox, Mopar skid's, Fumoto Drain Valve, 3% Tint, ARB front bumper, Full set of Miller tools (9599) to loan within my immediate vicinity.

No problems what so ever. When I load up I put a few pounds of air in them. Empty, I keep a minimum amout to keep their shape.

_________________
2006 Liberty Renegade
OME, Rancho, RRO A arms, RRO roof rails w/ diy cross bars, Dual XHD7714 with Pyle speakers, drop in K&N air filter with home made CAI, 8k smittybilt winch , Sears Platinum P1, in cab winch control, 100w Optilux lights, 7" e-code Hella headlights,245/75-16C Duratracs. DIY rockrails, DIY rear double deck cargo rack.

Candpliberty thank you for your previous reply. I have a couple of questions. I ordered, and received the airlift 1000.

1. I'm guessing you removed the bump stop. I believe the air bag takes the place of the bump stop?

2. The kit comes with two spacers a 1/2" and a 1". Did you use none, one, or both spacers included with the kit? It seems to me that at least one of the spacers must be used to center the air induction valve?

Thanks Tony

_________________
2005 Jeep Liberty Limited CRD, JBA coilovers-4.5 Arms, 5xMoab's with 265-75-16 Mickey Thompson Baja ATZ, Safari snorkel, Suncoast T/C, GDE Hot tune, Mandrel bent CAC Tubes, EHM to airbox, Mopar skid's, Fumoto Drain Valve, 3% Tint, ARB front bumper, Full set of Miller tools (9599) to loan within my immediate vicinity.

!. yes, the bumpstop is removed.2. I used the red plastic spacer on the bottom. I just went to check the bags and in the coffee can with all the left over parts. The black one with the nubs are still unused.

_________________
2006 Liberty Renegade
OME, Rancho, RRO A arms, RRO roof rails w/ diy cross bars, Dual XHD7714 with Pyle speakers, drop in K&N air filter with home made CAI, 8k smittybilt winch , Sears Platinum P1, in cab winch control, 100w Optilux lights, 7" e-code Hella headlights,245/75-16C Duratracs. DIY rockrails, DIY rear double deck cargo rack.

Thank you for the information candpliberty. Mine are installed the same way. Used the red 1/2" spacer, removed the bump stops, and teed the air lines together rather than independently. Not sure if there is a difference with the inner diameter of the springs between OME and jeepin by Al's. I had to deflate the bag douse it with soapy water to get it into position within the spring. Anyways I'm very happy with it as is. Need to tow with it soon to see how it works with that application.

Tony

_________________
2005 Jeep Liberty Limited CRD, JBA coilovers-4.5 Arms, 5xMoab's with 265-75-16 Mickey Thompson Baja ATZ, Safari snorkel, Suncoast T/C, GDE Hot tune, Mandrel bent CAC Tubes, EHM to airbox, Mopar skid's, Fumoto Drain Valve, 3% Tint, ARB front bumper, Full set of Miller tools (9599) to loan within my immediate vicinity.

Excellent! Happy to help!!!!

_________________
2006 Liberty Renegade
OME, Rancho, RRO A arms, RRO roof rails w/ diy cross bars, Dual XHD7714 with Pyle speakers, drop in K&N air filter with home made CAI, 8k smittybilt winch , Sears Platinum P1, in cab winch control, 100w Optilux lights, 7" e-code Hella headlights,245/75-16C Duratracs. DIY rockrails, DIY rear double deck cargo rack.