Doors

Sneagan · **Joined:** Thu Jan 21, 2010 5:14 pm **Posts:** 7

Ok so I know I don't have a wrangler and all, but sometimes I still wanna take off my doors. Is it possible, legal, and reasonable. Obviously I'll go without if it's not a simple on/off, off/on procedure. I just figured I'd ask to see if any o y'all knew. Thanks guys!

JeepinJarhead03 · **Posted:** Tue Apr 06, 2010 2:11 am

yes it's possible known a few with libbys that took their doors off with no problems

if you have heated mirrors, or power windows/door locks you'll have to make disconnects for the wiring going to the door

depends where you live i suppose whether it's legal or not

have to bypass the door open doohicky thing too

i personally don't think it's worth it, but it's not my rig

Diggerfreek · **Posted:** Tue Apr 06, 2010 2:33 am

OHV KJ ran his rig with out doors

Xx_Flip_xX · **Posted:** Tue Apr 06, 2010 4:05 am

its totally possible. all you gotta do is un bolt em and unplus things.

to solve the door ajar issue, they make clips to go over the little button things that the door presses when its closed so that even tho your doors are gone your vehicle will think they are closed

Quicksilversurf917 · **Posted:** Tue Apr 06, 2010 7:22 am

^^^^ do you know where to find these? Or anyone else know?

Jeepin_it_real · **Posted:** Tue Apr 06, 2010 10:45 am

digger when are your doors coming off? haha

Diggerfreek · **Posted:** Tue Apr 06, 2010 3:11 pm

Jeepin_it_real wrote:

digger when are your doors coming off? haha

Do ya know how much mine weight :shock:

Xx_Flip_xX · **Posted:** Tue Apr 06, 2010 4:17 pm

http://www.quadratec.com/products/13029_200.htm

http://www.quadratec.com/products/13029_100.htm

try either one of these... they say its for a wrangler but it dont matter. all jeeps are pretty much the same when it comes to wiring.

tjkj2002 · **Posted:** Wed Apr 07, 2010 8:14 am

Xx_Flip_xX wrote:

to solve the door ajar issue, they make clips to go over the little button things that the door presses when its closed so that even tho your doors are gone your vehicle will think they are closed

Won't work for the KJ since those sensors are integrated into the door latch in the door itself and not a separate button that the TJ's use.You would have to wire in a bypass.

Budke · **Posted:** Fri Apr 16, 2010 10:05 am

Getting the doors off is the easy part.
But what about getting them back on?
How hard is that? Alignment issues at all?

Quicksilversurf917 · **Posted:** Fri Apr 16, 2010 10:08 am

And what about the door dinging issue...noone ever solved that problem??

tjkj2002 · **Posted:** Fri Apr 16, 2010 11:25 pm

Budke wrote:

Getting the doors off is the easy part.
But what about getting them back on?
How hard is that? Alignment issues at all?

That can be fun when they still have everything in them still(heavy).I had mine off when I painted mine,still not to fun with just a empty door.

Budke · **Posted:** Sat Apr 17, 2010 8:07 am

Did yours line up when you put them back on your did you need to adjust them?

tjkj2002 · **Posted:** Sat Apr 17, 2010 9:59 pm

Budke wrote:

Did yours line up when you put them back on your did you need to adjust them?

Still adjusting them after 7 years,just not the same after you remove them once.

ridenby · **Posted:** Sat Apr 17, 2010 11:34 pm

NOT A SIDE DOOR,replaced tailgate,thing moves every month,at least,thought about red lock tight on it.

monkyfart13 · **Posted:** Thu May 06, 2010 1:02 pm

Enjoyed a beautiful weekend of offroading at Uwharrie National Forest with my doors off.

6spdKJ · **Posted:** Thu May 06, 2010 6:42 pm

Thats awesome!!

VoodooMann · **Posted:** Fri May 07, 2010 11:19 am

I hope you didn't wheel too hard.

the doors are essential to the structure of the Uniframe.

if you wheel too hard and can't get the doors to line back up, guess what...

bent uniframe.

I will eventually make half/tube doors for that reason.

teckman02 · **Posted:** Fri May 07, 2010 1:29 pm

VoodooMann wrote:

I hope you didn't wheel too hard.

the doors are essential to the structure of the Uniframe.

if you wheel too hard and can't get the doors to line back up, guess what...

bent uniframe.

I will eventually make half/tube doors for that reason.

hey andy check this out for some ides
http://www.nagca.com/forum/showthread.php?t=38564

they lok sweet in person

VoodooMann · **Posted:** Fri May 07, 2010 1:52 pm

that is almost exactly what I had planned.

I just need to get another set of doors. :-)r

Doors

Who is online