It is currently Sun Dec 28, 2025 5:28 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 24 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: beeping?
PostPosted: Thu Jun 20, 2013 12:16 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Hi all, went to see my sister at the coast last w/end, and on the way there, I had what I assume was an audible alarm !!??

It was two sets of three beeps! like - beep beep beep ... beep beep beep type of thing, this happened about three times on the journey, no warning lights up, and no effect on drivability ??

Then the evening before we came back, the engine symbol warning light came on, and has been on since :(

Any idea's guys ?

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 2:10 pm 
Offline
LOST Addict

Joined: Sat Mar 29, 2008 8:04 pm
Posts: 1627
Location: Massachusetts
Scan and post codes.

DOC

_________________
2005 KJ CRD Ltd Detroit TrueTrac Bilsteins G2 GDE "HOT" ECU GDE TCM "Tow Tune" "euro" TC SEGR Weeks Elbow New HG at 130K ARPs Clean CAT aFe Filter Magnaflow Exhaust EHM Cumminos In-Tank Lift Pump Hayden Fan Clutch Nylon Fan VH Enabled with GDE lower shutoff point Recalibrated Temp Gauge Tekonsha Prodigy Sears P-1 ZDDP


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 2:53 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Sorry Doc, me no understandy ?? :oops:

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 2:54 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jun 18, 2012 5:50 pm
Posts: 1195
Location: Central Indiana
Scan your OBD port, post what error codes show up.

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 3:02 pm 
Offline
LOST Addict
User avatar

Joined: Sat Mar 17, 2012 12:53 am
Posts: 1343
Or do the key dance and post codes


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 3:13 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Nope! ... I know you guys are tryin to communicate with me in some form of strange dialect, but if someone could speak english we'll get on swimmingly :lol:

Just for the record, I have no scanning equipment, and I'm not a great dancer but I'm willing to give it a go! :BANANA:

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 3:31 pm 
Offline
LOST Addict

Joined: Fri Apr 02, 2010 3:14 pm
Posts: 2294
Location: Sumter, SC
You need to buy/borrow a code scanner. That is called OBD scanner (you can find it on ebay for example, but i hear not all of them work with your cherokee/liberty here in US). Maybe you have a friend, or an autoparts store that can read it for free. Acctron is a brand for that scanner that works for us in the US. Under the steering wheel, right side towards the center console, there is a big wide port, with a lot of connections (check this link http://www.obdclearinghouse.com/OBD-CH/ ... iberty.jpg), where you must plug in the OBD scanner (OBD = On Board Diagnostic). That scanner reads the codes stored in your ECU (car's computer) and displays them on the scanner's screen, so you can see them and research what they mean. Try reading the codes and post them here so someone can help. Without knowing the code is impossible to know what is the problem, is like calling a doctor and telling him you don't feel good, but no other detail, and expecting a magic pill that will square you away.

P.S. Usually the beeps are caused by the tire pressure sensors, I am thinking you may mistakenly think that tire low pressure indicator is engine light? If you still have the jeep manual, there is a description in there of the instrument cluster, take a look and see if that light is the engine light. Don't want you to think I am patronizing you, but I do not know how technical are you either, so better more info/questions...

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.


Last edited by thermorex on Thu Jun 20, 2013 3:40 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 3:40 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Ahhhh right, cheers Thermo ... I'll try and get the fault codes read somehow :wink:

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 3:41 pm 
Offline
LOST Addict

Joined: Fri Apr 02, 2010 3:14 pm
Posts: 2294
Location: Sumter, SC
ando wrote:
Ahhhh right, cheers Thermo ... I'll try and get the fault codes read somehow :wink:

Cool, I just edited my post, pls read it again.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 3:49 pm 
Offline
LOST Addict

Joined: Fri Apr 02, 2010 3:14 pm
Posts: 2294
Location: Sumter, SC
oh, and the "key dance" is turning 3 (or 5?) times the ignition on, without starting the engine, some Jeeps usually show the trouble code(s), never worked for me though.

_________________
2005 kj CRD, samco, suncoast tc, provent, Kennedy lift pump, GDE ECO full torque, 2nd gen filter head, 245/70/16 a/t tires, mopar light bar, fumoto oil valve, OEM Skid Plates, ARB Front bumper and HD OME, tru cool LPD47391 40k GVW tranny cooler (stock cooler delete), FF Dynamics e-fan and shroud, rocker arms replaced, HDS2 190F thermostat.


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 4:08 pm 
Offline
LOST Junkie

Joined: Sun Dec 18, 2011 1:15 pm
Posts: 776
Location: Eastern US
thermorex wrote:
oh, and the "key dance" is turning 3 (or 5?) times the ignition on, without starting the engine, some Jeeps usually show the trouble code(s), never worked for me though.

Works on 05 not 06.

Works on mine.

_________________
Grid power- the one true essential

2005 Liberty CRD- ARP studs, Fumoto, Hayden FC, inline Tstat, ETechno 7v GP, Platinum P1, in-tank lift pump.
1983 Volvo D24T
1981 Volvo D24
Dodge Cummins TD
Case 580B
Mitsubishi MT180 diesel
Kubota BX25 diesel


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 7:30 pm 
Offline
LOST Junkie

Joined: Mon Mar 24, 2008 10:26 pm
Posts: 943
Location: West Coast, Canada
ando wrote:
Hi all, went to see my sister at the coast last w/end, and on the way there, I had what I assume was an audible alarm !!??

It was two sets of three beeps! like - beep beep beep ... beep beep beep type of thing, this happened about three times on the journey, no warning lights up, and no effect on drivability ??

Then the evening before we came back, the engine symbol warning light came on, and has been on since :(

Any idea's guys ?


Is your coolant low? Low coolant throws no codes and displays LoCool on your odometer. Also brings on 3 chimes when vehicle is put in drive or may chime while driving.

_________________
2006 Liberty CRD Limited

Provent @ 43,000 km
SEGR in progress
SAMCO Sport hoses @ 48500 km
Goodyear Wrangler Duratrac LT225/75R16


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Thu Jun 20, 2013 10:18 pm 
Offline
LOST Addict
User avatar

Joined: Sat Mar 17, 2012 12:53 am
Posts: 1343
LMWatBullRun wrote:
thermorex wrote:
oh, and the "key dance" is turning 3 (or 5?) times the ignition on, without starting the engine, some Jeeps usually show the trouble code(s), never worked for me though.

Works on 05 not 06.

Works on mine.

sry the key dance works great on mine! no scanner needed


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Fri Jun 21, 2013 4:13 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Hi Ando,

Nice to see you back. If you decide to buy an ODB II reader be carefull what you buy here in the UK as not all of them can read the Jeep/Chrysler codes. I borrowed one off a friend and one off a mechanic and they both couldn't get any reading off, just clear error code (PS having said that the Jeep dealer had problems with mine too :? )
Did you see my PM?!

Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Fri Jun 21, 2013 7:29 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Wed Jul 18, 2012 8:53 pm
Posts: 1404
Location: The WV Panhandle
Low windshield washer fluids will also cause the 3 dings and will show on the odometer display

_________________
2003/3.7 SOLD

2007 Wrangler - traded

2010 Wrangler Rubicon


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Fri Jun 21, 2013 10:56 am 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Thanx for all the help so far guys, I really do appreciate it :wink:

Right, just popped upto my local garage, and he said he is just in the process of downloading the latest software updates for his diagnostic equipment at the mo, and that it will deffo read the Jeep codes when complete :D .. and to pop by in the week, and he will plug it in and see whats going on :D

Incidently, to answer those kind enough to suggest possible reasons for my recent issues ... screen wash level ok, coolant level ok, and I dont think mine has TPS fitted (?)

I have to say (completely un-connected), after living with the KJ for a while now, and having seen a winter, this is the first "issue" I've had (apart from never getting to bottom of the ticking noise you may or may not remember :evil: ) I'm still amazed at how the 2.8 pulls through the gears!! .. this thing goes like a rocket when you extend ya right foot in every gear inc 6th :o .. and has not missed a beat to be honest :) , I was following 2011 Range Rover back from Wales last w/end, and he was seriously trying to get away from the odd looking dirty Jeep in his mirror with noisy MT's and a safari rack in his large £50k+ motor ..... no chance! :twisted: ..... I gained on him on the straights, and was more composed in the twisty bits (even with muds on 8) )

Fil - hi mate, yeh got your PM when I started this thread, unfortunately I have managed to fall out with the collegue whos husband does the fabrication work for me .. so the rack I have on the Jeep will prob be my last one from him :cry: tho not befor I got him to fab up a rear dog gaurd/cargo shelf I designed :lol: :wink:

Edit: no joy from cycling the ignition either :(

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Fri Jun 21, 2013 11:37 am 
Offline
Lifetime Member
Lifetime Member

Joined: Sun Mar 28, 2010 9:15 am
Posts: 5431
Location: Tallahassee, Florida
For what it's worth if you lack the Electronic Vehicle Information Center (EVIC) in the overhead console (displays things like external temperature, compass direction, mpg, tire pressure, etc) then some warnings are displayed, briefly I think, in the odometer window below the tach. Given the limited digits the messages can be kind of cryptic (ex. Glass which I suspect means the rear gate glass is open). Those types of warnings won't usually trigger a Check Engine Light though. What I am trying to say is your occasional chimes may be unrelated to the CEL.

I do know when I get the chimes they always come as a complete surprise and if usually takes me a few seconds to realize I need to look at the EVIC to see what I am being "told".

I have no clue if it's the case with the KJ much less the export KJ but in the past I've had vehicles that would chime at me if I forgot to switch off the turn signal after a lane change.

All of the above is based on US models and the Export ones may be different.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Fri Jun 21, 2013 1:54 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Yeah I have the EVIC, and checked it whilst it was beeping, along with the main display ... and nada!

I think your prob right in saying the two might not be related, just a coincidence :wink:

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Tue Jul 02, 2013 2:43 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Update: Local garage's diagnostic equipment couldnt make head nor tale of the MIL, so its booked in at a diesel specialist's for next week now :roll:

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: beeping?
PostPosted: Tue Jul 02, 2013 2:57 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Mon Jun 18, 2012 5:50 pm
Posts: 1195
Location: Central Indiana
No offense to you Ando, but if I lived where you live, I would make the drive over to the VM Diesel Specialist in Chesterfield, Derbyshire.

Those guys specialize in these engines, and a lot of us across the pond would be tickled pink just to be able to visit that place, as they supplied a LOT of parts for us yanks until IDParts started carrying a lot of OEM VM stuff.

Just a suggestion, gauranteed they can fix/analyze/solve your problems. This is the ONLY brand of engines they specialize in.

VM Diesel Specialist
Chesterfield, Derbyshire S41 9AR

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com