I know that this information exists on the site but I just don't have the time to find it. I am installing a lift pump in the morning and I need to know what size our fuel line is and which pin in the wiring harness to attach the power wire to. If someone can just post this info up I would really appreciate it.

_________________
'06 Stone White, CRD Limited
CRD Frankenlift II, Rock Lizard Rear Bumper, Mann Provent, GDE FT-ECO Tune, "Euro Torque Converter, Transgo 545RFE-H2 Shift Kit, 245/75 MT/R's on Moabs, Full Mopar Skids, Front Tow Hooks, CAT 2 Fuel filter and bleeder valve mod, Fumoto valve, Wahlbro Lift Pump, Custom 2 1/2" Exhaust

what lift pump you using, in tank or near fuel filter head? 3/8 fuel hose at the head. here is a link for the fuel pump at filter head.

http://www.lostjeeps.com/forum/phpBB3/vie ... hp?t=24527

_________________
2006 Black Jeep Liberty CRD Limited
K&N, Samco Hoses, Michelin 245/70-16 LTX A/T2, Fumoto F-102, V-Force Muffler, Mopar, Hitch, Trailer Wiring, Skid Plates, Slush Mats, Rear Shelf, Predator Stage 1, Transgo, ORM & CodeReader, Facet 40109 Pump
"IT'S A DIESEL THING, YOU WOULDN'T UNDERSTAND"
Certified Services Auto & Truck Repair

I'm installing the Walbro FRB-11 near the tank. This pump has lots of fans in the biodiesel and TDI arenas and was recommended by another member so I though I would give it a go.

_________________
'06 Stone White, CRD Limited
CRD Frankenlift II, Rock Lizard Rear Bumper, Mann Provent, GDE FT-ECO Tune, "Euro Torque Converter, Transgo 545RFE-H2 Shift Kit, 245/75 MT/R's on Moabs, Full Mopar Skids, Front Tow Hooks, CAT 2 Fuel filter and bleeder valve mod, Fumoto valve, Wahlbro Lift Pump, Custom 2 1/2" Exhaust