Hi everybody, I'm looking into getting a 1.5" front lift from Daystar (it's listed as a "leveling kit" on the website... www.daystarweb.com ... part # KJ09119BK I do believe). I took a look at the installation instructions and it states: "does not include Strut Mounting Plate". My question for any of the experienced Jeep folks is do I need the Strut Mounting Plates to properly install JUST the front spacers? I'm not looking for much of a lift so this front leveling kit really caught my eye and it was pretty cheap, too. Any help would be much appreciated!

_________________
Black 2004 4x4 3.7L V6 Auto
K&N FIPK w/ AEM filter
Borla Cat-back Exhaust
245/70/16 Avon Ranger's
Ram-Air gutter mod
Remanufactured Jasper trans
FastMan Throttle Body
Bosch +4 Platinum sparkplugs
Optima Red Top battery
Alpine radio
In the works:
Something to help my pathetic 42RLE. It's just awful...

Got the same kit.
About to install it ....
You do not need the strut plate with this lift.
Just slap in the spacers and away you go!

Thanks much man! You should definately post some pics once you get it done.

_________________
Black 2004 4x4 3.7L V6 Auto
K&N FIPK w/ AEM filter
Borla Cat-back Exhaust
245/70/16 Avon Ranger's
Ram-Air gutter mod
Remanufactured Jasper trans
FastMan Throttle Body
Bosch +4 Platinum sparkplugs
Optima Red Top battery
Alpine radio
In the works:
Something to help my pathetic 42RLE. It's just awful...