What are you talking about? Show me where it protrudes past the housing.

_________________
WWW.ROCKLIZARDFABRICATIONS.COM

Oh, and the diff covers have been "fixed" so this doesn't need (or shouldn't need) to be done to those tabs. I have also been asked about the bolt with the welded nuts that are with the hardware. I made those so if you don't have a huge allen wrench/socket to tighten/loosen the fill plug, you won't have to go out and spend a bunch of money to get one.

Your pic looks slightly different to this one, which is where my comment was "protruding" from


You can see clearly there is a section on the either side that sticks out still, and I have scraped those sides a few times already. I know i'm nit picking, but hey, for the amount of coin it would cost me to get one over here and on my car, you'd be too !!

_________________
Custom, Comfortable & Capable.......just the way it should be

Completely understandable. I think I can see where you are talking about, at the 3:30 and 7:30 spots on the diff cover where the housing rolls in slightly.

Correct. Its not a MAJOR problem, I just thought if someone were to go to the trouble of making such a fantastic product (and it is), that they would consider something like this. DC were just being lazy and cost effective in their decision to make the diff cover completely round, as that's what the stamping press would have been able to roll out.

RL, I still want to look at getting this off you. I'll PM you at a later date to discuss.

_________________
Custom, Comfortable & Capable.......just the way it should be

Has everyone who ordered these received them? I'm still waiting for mine, but I'm wondering if I got missed?

_________________
2006 CRD
Build Date 5/20/06
Purchased New August 23rd, 2006

Ok Marty...I scoured your website and found no such listing for your diff cover you offer...whereabouts would I go to see stuff on your site about it??

NOTE: I did read through this whole thread just about so I got the info I needed but what about some info on your site???

PLUS: JJ you still doing your offer on that gear lube or was that just for those that helped kick start this awesome buy??

_________________
Had 2005 KJ Rocky Mnt. Edition (destroyed)
Had 2006 KJ Sport 4x4
Have 2007 JK 4-dr Sahara 4x4 (tow package so stock 4.10s!!)
AEV 3.5" RS Lift; Schrockworks FR bumper and Warn 9.5ti winch; Cobra 75 CB; Rigid 50" LED light bar; Adventure Trailers (AT Overland) JK Kitchen setup in the cargo area.
Southern L.O.S.T. # 236487

I don't see it now either. It used to be under "tortoise" covers or something like that.

I hope he still is selling them.

_________________
TRADED 04' Renegade
Franken lift front/ Skyjacker rear
JBA uca's
245 Firestone Destinations

2015 Jeep Cherokee Trailhawk (stock)


2014 Yamaha FZ-09
1999 Yamaha VMax
LOSTKJs #124

Offer still stands. PM me for more info.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal

http://www.rocklizardfabrications.com/t ... _skids.htm

_________________
It may be that your only purpose in life is to serve as a warning to others.

06 CRD Sport
Built 5/11/06
Jeep Green
Rocklizard diff cover
V6 Airbox

Aren't those for the XJ or am I missing something still???

_________________
Had 2005 KJ Rocky Mnt. Edition (destroyed)
Had 2006 KJ Sport 4x4
Have 2007 JK 4-dr Sahara 4x4 (tow package so stock 4.10s!!)
AEV 3.5" RS Lift; Schrockworks FR bumper and Warn 9.5ti winch; Cobra 75 CB; Rigid 50" LED light bar; Adventure Trailers (AT Overland) JK Kitchen setup in the cargo area.
Southern L.O.S.T. # 236487

I'm dropping the company. They would tell me they had them in stock, then take several weeks before I got them. Ship time is only two days when they ship them out. I have enough delayed shipping problems of my own to have to worry about continuously checking in with another company. When I do get them in, I have to thoroughly inspect them, clean all the weld boogers off myself, make some fill plug keys so you guys to have to by a special tool for it, and for the little money I actually make on them, they have just not been worth my time. They are great covers for the price, but I just don't have the time and money to mess with them. They said they have 10 covers that have the 3/8" bolt ring instead of the 1/2" that they want to get rid of pretty quick. a loss of 1/8" thickness on the bolt ring is not a big deal at all. If I had enough people to pick those up, then I will get them, and be done with that company. So, if you want a diff cover, there are ten spots left, then you will have to get them direct from the company. I will sell these ten covers for $100 shipped. They will have the countersunk holes, stainless hardware, and the drain plugs. First ten to get me the money by the end of the month will get them, then I'm completely through with those covers. If you want to paypal, my paypal address is martin@rocklizardfabrications.com. If you want to pay by card, give me a call. If you paypal, I need full name, shipping address, year of KJ, phone number, and name on the board. I can't hold any, so first come first served. January 31 is the deadline, then I will place the order to fill the orders I get. Sorry guys, I'm just too busy catching up on my own products to mess with these anymore.

Thanks
Marty

Thanks for the heads up Marty....Be looking for my info before the end of the month...THANKS!!! Glad you know what is best for your company. No sense in dealing with something that is just causing trouble within....Best of luck to yas!!!

Regards - Scott

_________________
Had 2005 KJ Rocky Mnt. Edition (destroyed)
Had 2006 KJ Sport 4x4
Have 2007 JK 4-dr Sahara 4x4 (tow package so stock 4.10s!!)
AEV 3.5" RS Lift; Schrockworks FR bumper and Warn 9.5ti winch; Cobra 75 CB; Rigid 50" LED light bar; Adventure Trailers (AT Overland) JK Kitchen setup in the cargo area.
Southern L.O.S.T. # 236487

Well this sort of sucks. I am not going to be able to get in on this last run...if there is one. So can you hook us up with the company that makes them after this last sale? I will just have to do my own QC inspection I suppose.

_________________
It may be that your only purpose in life is to serve as a warning to others.

06 CRD Sport
Built 5/11/06
Jeep Green
Rocklizard diff cover
V6 Airbox

OK, talked to my supplier late Tuesday night, and he said he only has seven of these 3/8" ring covers left, not ten like I said earlier. And yes, I will post the company to get these from. They sell them for $120 shipped direct from them, but you get to do the extra booger chiselling, thread inspection, and come up with a tool to remove/insert the fill plug yourself. The first time I got them, I was actually surprised I had to do a QC inspection and cleanup before I felt they were good enough for my standards. I'm not saying they are bad quality or anything, they are a super beefy cover with a lot of extras for the best price I have seen, but they need to be cleaned up before putting them on.

Five covers and five days left.

Today is the last day to order one of these through me for $100 shipped, for the 3/8" ring with stainless countersunk hardware and drainplug. There are still four left.

Merry Christmas to me...... Happy Birthday to me....... Maybe mine will be worth more later on because it was from the end of the production run....

_________________
Feb/2006 Silver Sport 4x4 CRD